EOS equipment TIC-EOS01 / 02 / 03 / 04 connects telecommunication SDH network with Ethernet. Carrier is able to transport 100Mbps Ethernet service over SDH transmission network using TIC-EOS01 / 02 / 03 / 04 equipment without need of reconstructing IP data network, thereby to protect investment in existing network. Tic-EOS01 / 02 / 03 / 04..
 
 
network communication connector,rj45 cat5e keystone jack1.Housing material: PC UL94V-02.Insert material:flame retardancy ABS UL94V-03.PCB material: FR-4 T=1.6mm4.Contact material: phosphor bronze stamp pin T=0.35mm5.IDC contact material:phospor broze T=0.5mm Nickel plating6.Wire:AWG 22~26
 
 
Provides a direct optical interface to the core Ethernet/IP network/CATV, provide uplink port, downlink port and management port, compliant to the IEEE802.3ah standard.Features 1.IEEE802.3ah compatible 2.4 downlink PON ports 3.32 optical branches per OLT port for connection of up to 32 ONUs 4.Downstream transmission up to 20Km 5.128..
 
 
1000base bidi sfp with DDM function pls contact us for details BiDi WDM SFP modules, support DDM function, 1310T/1550R and 1550T/1310R,20km,LC connector, 1.25G
 
 
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOThe cutoff switch off local area network communication OOOOOOOOOOOOOOOOOOOOOOOOOOOOOThis product connects with a switch or cuts the personal computer connected with the LAN cable. Made in Japan, High-quality, and does not easily break.Exterior is composed primarily of ABS. It is NT-T5 The switch of a LAN cable.
 
 
Simatic 505-CP1434TF SINEC H1 Network Communication Processor ModuleP/N: 505-CP1434TFPhysical Condition: Good. Scuff marks and scrapes on unit. Minor nicks can be found throughout the unit. Some of the pins are slightly bent. The H1 Ethernet bus interface bracket is bent but it does not appear to hinder its functionality.Dimensions (L" *..
 
 
Check Before Ordering: 1. Inquiry-Detail quotation. 2. Confirm the sample, price, lead time, payment term etc. 3. Slaes send the Proforma Invoice.4. Customer remit 30% payment for deposit and send us Bank receipt. 5. We arrange production once receiving the deposit.6. End Production-Mass production products photos will be sent for approval. ...
 
 
1Port Cat5e shielded surface mount box(network communications,face plate)3u"~50u" gild plating availableABS materialSize:50*66*25.4mmFluke test report availableOME service available
 
 
cat5e and cat6 LAN computer network communication cable1.Bare solid or stranded copper conductor, Copper wire diameter: 0.4mm (AWG26) or0.5mm (24AWG) RoHS availableUL approval 2. Application: Gigabit Ethernet, 155 Mbps ATM. 3. 4 pairs twisted pair cable... 4. All cables meet or exceed the requirement proposed by TIA /EIA 568 B. 2, ISO/IEC 11801..
 
 
1. Ethernet Cable, CAT5e2. This Cable connects all the hardware destinations on a Local Area Network (LAN). 3. It is ideal for use with 10 Base-T, 100 Base-T networks.3. Color: Blue, grey(light and deep), black...4. Compliance Standard: CE. RoHS. EIA/TIA-568B Category 5e. Product features: Conductor:Material: Pure CopperStructure: 0.5mmOD:..
 
 
cat 5e jack/keystone jacks/rj 45 coupler/network communication1.Housing material: PC UL94V-02.Insert material:flame retardancy ABS UL94V-03.PCB material: FR-4 T=1.6mm4.Contact material: phosphor bronze stamp pin T=0.35mm5.IDC contact material:phospor broze T=0.5mm Nickel plating6.Wire:AWG 22~26
 
 
The CAT 6E cable is one of the data cable, the description as below:Application:10Base-T 100Base-T4 100Base-TX 100Base-VG-ANYLAN 155Mbps ATM 622Mbps ATM 1000Base-T.Standard: ISO/IEC11801 ANSI/TIA/EIA-568BFrequency: 1100MHzGeneral Characteristics:Characteristic Impedance 100±15Ω . Nominal Velocity of Propagation 68% . Maximum DC..
 
 
HJ1278----Weatherproofing kits for BTS antenna feeder system Antenna feeder system is an important part of mobile BTS (base transceiver station). The installation and maintenance of antenna feeder system will directly influence the mobile communication quality and signal scope.The antenna feeder system is made of three parts: antenna, feeder,..
 
 
HJ1278----Weatherproofing kits for BTS antenna feeder system Antenna feeder system is an important part of mobile BTS (base transceiver station). The installation and maintenance of antenna feeder system will directly influence the mobile communication quality and signal scope.The antenna feeder system is made of three parts: antenna, feeder,..
 
 
:usb industrial GSM/GPRS modemGeneral featuresindustrial designAluminum casingwireless access to internetBased on Wavecom modules Q2403B900/1800/1900MHZTCP/IP Stack3v SIM Card slotStandard USB interfaceSIM Application ToolkitSend and receive data.email .SMSSupport AT command to make remote control (GSM07.07 and 07.05)GPRS Class 10Antenna with..
 
 
Features:.1.CAT6 keystone jack2.8 pin RJ45 jack3.Insertion dependabllity 750 times4.Housing material: PC UL94V-0,Insert material:flame retardancy ABS UL94V-05.IDC contact material:phosphor bronze T=0.5mm Nickel plating6.Available in CAT5E, CAT5, T568A, T568B WIRING, Meeting every cabling requirement 7.PCB material: FR-4 T=1.6mm8.CAT5,CAT6..
 
 
messenger,cat5e data lan cable,network communicationKey features: Conductor: 24 AWG SolidInsulation: FEP fluoropolymer resin on each pair Jacket: FR PVC / LSOH PVC Characteristic impedance: 100 W ± 15% from 1 to 155MHz. ACR: 15 at 100 MHz, 10 at 155 MHz. Propagation delay: 5.7 ns/m at 100 MHz, max...
 
 
Product Name: 19" 42U free standing network server rack cabinet Main Features1) Detachable composite structure, reducing shipping and storage cost, easy to assemble.2) 19” standard assembly width.3) Vertical cabinet can more backwards and forwards and adjust up and down to mount instrument.4) On the top, it is equipped with..
 
 
Plastic Communication Box:1)Specifications: Features-CC-18Partsa)Material : ABS ;b)Color : Bule;c)Temperature Range : -20-70;d) Internal pillar for mounting PCB on the bottom of the body;e)Suitable for communication;f)Surface treatment:Painting;S/NPart NameQTYMeterialSepcifcation1Cover1ABSFinishedTextured2Bottom1ABSWeight3Plate1 ABSPackage20..