All
Home > Products > Chemicals > Chemicals Agents - 270 Products
 
NAME: TC_1208S ( Textile Auxiliaries Agents TC-1208S )Description:Finish aid--silicone oil seriesAmino Silicone Oil TC-1208S (low-yellowing, fluffy and smooth)The product, the most advanced silicone softening agent nowadays, belongs to amino-modified silicone oil series, containing active gene of self-cross linking. The perpetual, soft,..
 
NAME: Raising Agent TC-WSDescription:the product is a fluff agent exclusively for cotton and blended fabrics, able to increase their hand feel, improve raising effect and shorten raising time. Also applicable to softening and plumping finishing of natural fibers, man-made fibrous wool and their blended fabrics. Physicochemical..
 
PolyacrylamidePolyacrylamide ——PAM, be so called an of flocculant or coagulate, Can be divided into cation type, anion type, nonionic PAM type. the molecular weight is between 300-2000 million.product external appearance: White powder granular ,PAM is a linear polymer, soluble in water, its after dissolving solution is transparent..
 
Chemical purifying agentPolymerized Ferric Sulphate PFS :PFS is an inorganic macromolecule product that is highly efficient and has a steady chemical characteristic that dissolves with water. It is widely applied in water purification, industrial water treatment and wastewater treatment.In the process of water treatment, PFS hydrolyzes a..
 
1, Uses JH-21-type non-silicon defoamer is used for delayed coking devices, it can reduce the foam layer height of coke tower to extend the coking time; reduce coke powder to protect cold-exchange equipment and radiation pump; reducing coke powder of gas and diesel oil to prevent toxicity of hydrogenation devices; reduce coke deposition of..
 
shoes wrinkle chemical with liquid form applied with low temperature iron ClassificationChemical Auxiliary Agent ScopeAll kind of shoes and shoe upper leatherSpecifications1.Liquid form ironing aid applied to eliminate wrinkles on shoes by using a small iron with low temperature.2.Wrinkle chaser can be used to repair.3. Impart the silky..
 
Our products have all passed SGS inspection and made the pre-registration of REACH,Company has passed ISO9000 certification. Common name:Crosslinking agent TAIC,Curing agent TAIC,Rubber additives TAIC, Bridging agents TAIC,Accelerating agent TAIC,Crosslinking coagent TAIC,DOIE YC-101Chemical name:Triallyl isocyanurateFormula:C12H15N3O3Molecular..
 
ClassificationChemical Auxiliary Agent ScopeAll kind of leathersSpecifications1.Hand modifier desighed for furniture, clothing2.Ionic:Non-ionic Solid content: 20%3.Can be used for water field4.Appearance:Milky5.Has already obtained the quality authentication6.High quality7.Delivery on time Size of HDPE blue drum30 KGS:30cm*30cm*54cm60..
 
White solide pam / anionic polyacrylamide oilfield chemicals agent / APAM 1. Basic information: Anionic Polyacrylamide is white powder which with molecular weight of 6 million-24 million has good water solubility, and it can be dissolved in water by arbitrary proportion but not inorganic solvents. The APAM has the characteristics of..
 
GONGYI CITY XIANKE WATER SUPPLY MATERIAL CO., LIMITED1.Polyacrylamide (PAM) -- XKGS Brand 2.Key specifications:Appearance: solid product appearance is white or slightly yellow powder,the liquid is a colorless viscous, easy soluble in water, decomposes when temperature exceeds 120°CNature: Polyacrylamide (Polyscrylamide)..
 
Complex corrosion inhibitor1. Main featuresIt has convenient operation, good scale inhibition and obvious effect for restraining cauterization. It can restrain metal solubility.2. Quality indexItem nameQuality indexAppearancecolorless to yellow liquidCorrosion inhibition rate%≥85Kinematic viscositymm2/s.30oC≤20Density g/cm30.95-1.10PH..
 
Super inflating Agent(Super carboxylic Starch Sodium)This is a our newly-developed item, which is some kind of white powder and free from any flavor but quicklyinflatable in water. into the size of 25ml within 15 minutes. It is superior in quality than the same products both at home and abroad. It is mostly used as crumbling agent. Our current..
 
Emulsion softener for textile pigment printing1) General Description EM-50 Emulsifier is used to make water-in-oil type of paste.It is nonionic emulsifier and play high impact on printing coloration and viscosity.2) Technique Data Appearance Composition Solid content PH value white or yellowish fatty..
 
Textile Specific Hygroscopic And Perspiration Finishing AgentProduct DescriptionIn general, the water-absorbent and quick-drying are two opposing concepts,absorb more water means the drying time naturally extended, but XS-002 can solve this problem well. Because the XS-002 is in the amorphous zone within the closed fiber ,at the same time it..
 
Emulsion softener for textile pigment printingModelTechnical DataProperty and FeaturesEM-501)Appearance: White or yellowish viscous liquid 2)Composition: fatty alcohol-polyoxyethylene ether 3)Solid content: 50±2%4)pH value: 6.7-71) Used to make water-in-oil type of paste.2) Nonionic emulsifier and play high impact on printing..
 
SKHZYE-DPE91ADe-inking and Stickies Removal Agent PrefaceInk and fibre on waste paper attach tightly, it is very hard to remove the ink by ordinary methods. SKHZYE-DPE91A could improve the de-inking ability remarkably, and reduce the alkali dosage by 10%-15%, obviously enhance pulp output and quality of pulps, as well as improve the pulp..
 
Fireproof material Ferrous Sulfate Product Identification Product Name : Ferrous SulphateSynonyms : Iron (II) Sulfate, Green Vitriol, CopperasCAS No. : 7782-63-0 (Heptahydrate); 17375-41-6(Monohydrate)Molecular Weight: 278Chemical Formula: FeSO4.7H2O Physical and Chemical PropertiesAppearance: Blue Green CrystalsOdor:..
 
reclaimed rubber chemical agent :Useful:Reclaimed rubber activator can greatly shorten the time of desulfurization, improve reclaimed rubber process performance, reduce the dosage of softener, improve the quality of reclaimed rubber product. Activator under high temperature produces free radicals combined with rubber molecules of free radicals,..
 
polyacrylamide cation as chemical auxiliary agents Product overviewpolyacrylamide is made of cationic monomers and copolymerization of acrylic amide, granulating and drying, crushing into small white granules or powder, non - toxic, not flammable [molecular formula] (CH2-CHCONH2)n(not ion type)(CH2-CHCONH2) n(CH2-CHCOOHa) m(anion type) the..
 
Anionic polyacrylamide (APAM) chemical auxiliary agentsProducts overviewThis product adopts acrylamide former add alkali or add after alkaline hydrolysis technology, the granulation, drying, crushing and into. Product appearance as a white tiny particles or powder solid, non-toxic, non-flammable.Formula OH or H +- CH2CR - -..
 
 
 

Resources