Description:SF-G series draught fan with shutter has is a new product developed and designed by our company according to domestic actual situation, has the characteristics of low noise, strong Wind Flow, low energy consumption and rational structure, etc. whose blades are designed and made according to the theory of three-dimensional flowing...
 
The DF series Draught fans is the form of impeller as follows:“leafy, forward direction, narrow wheel”, it has a series characters of big flow zone, accelerate circulation of fluid flow in type, and when Convection cell strong pressure, it produces small eddy. It has advantages of large Air flow, high air pressure, low noise etc. It..
 
The DF series Draught fans is the form of impeller as follows:“leafy, forward direction, narrow wheel”, it has a series characters of big flow zone, accelerate circulation of fluid flow in type, and when Convection cell strong pressure, it produces small eddy. It has advantages of large Air flow, high air pressure, low noise etc. It..
 
The DF series Draught fans is the form of impeller as follows:“leafy, forward direction, narrow wheel”, it has a series characters of big flow zone, accelerate circulation of fluid flow in type, and when Convection cell strong pressure, it produces small eddy. It has advantages of large Air flow, high air pressure, low noise etc. It..
 
Product NamePlastic draught fan mouldProduct materialPPCore&Cavity Steel1.2738Steel hardness: HRC34-38Mould StandardDMECavity Number1Injection SystemDirect gateEjector SystemEjector pinCycle Time40" Tooling lead time50 daysMould life500,000 timesQuality assuranceISO9001Our Advantage1.High quality2.Reasonable price3.On time..
 
1) all the frame and parts are made of NC punching presses, NC press brakes ,and there are 10 shuters which are 0.8mm and the middle shutter is 1.2mm2) Centrifugal shutter system and other fitting of shutter made of Nylon, high quality, 100% raw material, high strength, and long service life.3) The inner steel fitting install in the flange,..
 
Plastic Bathroom Exhaust Fan ProductExhaust Fan ModelKHG-Y Size4"/100mm5"/120mm6"/150mm Voltage(V)110-240110-240110-240 Frequency(Hz)50-6050-6050-60 Power(W)121518 Air Volume(m³/min)233.7 Applicable Area(m²)3-66-1110-20 Motor100% copper wire Materialall ABS plastic Power Cord & Plug3*0.5mm²*70cm with NO..
 
Induced Draft Fan At present,tnere are many boiler series, but coal quality varies from one to another, plus after installing the dust-removal equipment and waste heat utilization device, it creates in sufficient drawing force which influences its normal running In order to overcome the drawing force shortage caused by the above mentioned..
 
Boiler Induced Draft Fan Currently, there are so many kinds of boilers with much different coal characters, with dust removing devices and waste heat reusing equipments influences, and it makes the draft power not enough so as to work normally. In order to overcome lack of the draft power, positive pressure, affect the normal inflammation of..
 

AC axial fan

Posted on 02-01-2008
 
Performance introduction The centrifugal boiler draught fans of Type Y5-47 is characterized with low noise, simple structure and flexibly adjustable air volume and wind direction, appropriately used in industrial boilers burning various coal materials and equipped with dust extraction devices. Its air transportation temperature is less than..
 
CE/RoHS 560mm impeller AC axial Draught fan for cooling 1. Impeller5-sickle bladed galvanized impeller, sizes from 200 to 710mm, available in 50/60Hz and UL types, air volume from 480 to 16080m3/h. The center-plate of impellers fit dynamic profile. All impellers have passed balance test according to our own standard, which is higher than..
 
120mm ac draught fan 220V: The General Description of Axial AC Fan:This series of fans are of drum-shaped aluminium alloy.the fan blades of PBT plastics and the electric motor with flange protection form an integrity.It is characterized by small size,free maintenance,easy installation,low noise,less vibration,reliable operation and excellent..
 
Marine explosion-proof centrifugal draught fan 1. PrefaceCBZ series explosion-proof axial centrifugal fans for marine use are designed and manufactured according to GB 11799-89(Marine Explosion-proof Axial Centrifugal Fans), and general description and explosion-proof electrical equipment d of GB3836-83 Electrical apparatus for explosive..
 
we offer complete set of yutong parts-yutong draught fan ventilatorCompetitive price, quality assurance,good after-sale serviceour company is specialized in complete sets of parts for bus,light truck and heavy truck.our main brands are volvo parts, man parts ,mercedes-benz parts , scania parts, north-benz parts, sinotruk parts ,howo..
 
JFD-900E Industry exhaust fan /industry exhaust fan /cooling fan1. The outline border adopt advanced automatic process, more accuracy, material adopt zinc coat and zinc plate 2. The aluminum metal alloy of the high strength hub, adopt aviation aluminum magnesium metal alloy, light weight, high strength, good tensile3.Strap adjust automatically,..
 
Brushless cooler fan 60*60*15mm:General Specifications:Frameplastic(UL94v-0)Impellerplastic(UL94v-0) Bearing typeSleeve Bearing and Dual Ball BearingLeadwireUL1007AWG#24 or Equivalent (+):Red(-):BlackMotorImpedance Protected and Reverse Polarity ProtectedVoltage5VCertificationISO9000, UL ,CE, RoHS, TUV Expected Life:1.Ball Bearing 50,000..
 
Explosion-proof draught fan with CE certificateApplications1. Used in Zone1 and Zone 2 dangerous place.2. Explosive gas atmosphere: class A,B;3. Indoor or outdoor. (IP54)Features1. It is composed of motor, vane, metal frame and shutters,etc.2. Wiring with steel tube or cable.3. GB3836-2000,IEC60079 standardMain technical parameters TypeVoltage..
 
ADDA AD7025GP cooler fans General SpecificationElectric Strength: 5mA max at 1500VAC for 1 min between lead wire and frame Insulation Resistance: 10M ohm between lead wire and frame(DC 500V) Life Expectancy(Ball bearing): 50000hrs min at 40 degree C/L10 relative humidity 65%+/-20% Life Expectancy(Hypro bearing): >40000hrs min at 40 degree..
 
◊ Product picture◊ Drawing ◊ Specification ◊ Model Description YWF4E-400S-5L-G1.2.3.4.5.6.7.8.1.YWF-External Rotor Axial Fan2.Motor pole number:2-2poles,4-4poles.6-6poles,8-8poles3.D:3-phases motor,E-single-phase motor4.Blade diameter:400-blade diameter is 400mm5.Wind code:S-induced draft,B-blow6.Blade number:5-5blades7.Wind..