All
Home > Products > Electronics & Electrical > Insulation - 271 Products
 
Features and applications:The polyester tapes are cut from high quality polyester films by using mechanical process. With characteristics of high mechanical strength, excellent insulation shielding properties, high temperature and cold temperature resistant, it is an ideal taping material for cables. Mainly used in taping down welding cables,..
 
Description of free asbestos calcium silicate insulation:calcium silicate pipe cover is mixed with Xonotlite and reinforced glass fibre with high service temp.good heat insulation, low bulk density, high strength, good durability and so on. 1.Good durability,can bear high temperature within the limit of continuous heat load.2.Low theraml..
 
PVC Insulation Tape(adhesive tape,PVC electrical insulation tape)PVC insulating tape excellent viscosity withstand voltage high-tensile suitable for insulative wrapping wires, cablesPVC INSULATION TAPES are made from polyvinyl chloride(PVC) as the backing material,which are coated with rubber pressure-sensitive adhesive.they are resistant to..
 
Product DescriptionElectrical Insulation Tapes:Take PVC film as its backing material, electrical tape has wonderful features, such as insulation, flame retardancy, cold resistance, voltage resistance, acid and alkali resistance, and solvent resistance.Electrical tape is widely used in automobile harness, wrapping of wires, insulation..
 
PVC insulation tape Details: CodeBackingAdhesiveThickness(mm)Adhesion(N/cm)Tensile(N/cm)Elongation(%)Temperature()VoltageBreakdown(KV/mm)Features &Application100DPVCrubber0.101.51416080≥40Used for wrapping electric wires and cables..
 
Electrical Insulation Sleeving1.1500-10000 Volt2.200 Temperature strength3.ID 0.8-30mm4.Application motors,transformers,instrumentElectrical Insulation Sleeving1.Dielectric breakdown:1500-10000 Volt2.Temperature strength:2003.Diameter:φ0.8-φ30mm4.Cold bend:No cracking or detachment of the coating after 60 minutes at -10..
 
electrical insulation sleevingDESCRIPTION:1.Silicone rubber fiberglass sleeving (inside rubber and outside fiber), is extruded in to tubes with silicone rubber.2.The outside coated with weaved fiberglass and coated with silicone in high temperature.3. Inside rubber and outside fiber has super insulation and temperature-resistance..
 
shrinkable sleeveDescription:the outer wall is made of Polyolefin and with inner wall of hot melt adhesive. Suitable for electrical applications where good longitudinal water tighness is needed.High shrink ratio( 3:1 4:1) having properties of excellent insulating, environmental sealing, and resistant to impact and abrasion. It is designed for..
 
Silicone Rubber Electrical Insulation MatsMaterials: SiliconeTemp Range: -30~+265°CColor: Grey, Red, Black, etc.Dielectric Breakdown Voltage >6.5KVDielectric Constant 5.5oC-in2/WThermal Conductivity: About 1.0~3.5W/MKThickness: 0.5~13mmPurpose: LED/CPU/Machinery Filling, Shock Reduction and Heat Sink.Shape:400x 200mm;410*310mmPackage:..
 
Electrical insulation and electronic equipment tapes are widely used in home electrical appliances, computers, and other electrical products and in telecommunications. They are also used for insulating, bundling, and fixing circuit boards and cables, masking and temporary fixing of electronics parts during manufacturing, and for grounding and..
 
Specification: Main material: NBR/PVC Length:1.2m; 10m Width:1m Thickness:3mm 6mm 10mm 13mm 15mm 19mm 25mm 30mm Adhesive: Adhesive sheet and non adhesive sheet Main technical performance reference of YIBA composite rubber insulation materialConditions and parametersTest StandardSurface..
 
Color PVC Electrical Insulation Tape Material: polyvinyl choride (PVC) Adhesive: rubber pressure-sensitive adhesiveFeatures: moisture-proof, good flexibility, anti-abrasion, resistant to acid& alkali. Application:1) Electrical cables insulating2) Cable wrapping and bundling3) Color coding, directional marking4) Cable..
 
Pvc Electrical Insulation Tape Technical data: Backing materialSoft PVC filmTypeCommon electrical tape and flame-resistant tape AdhesiveRubber baseThickness110-200micWidth12mm,13mm,18mm,19mm or as you requestColorBlack,white,red,yellow,green,brown,grey,etcLength3yard,10yard,10m,13yard,20yard,20m or as you needAdhesion(N/cm)1.6-1.8Tensile..
 
1. Material: High grade no-alkali fiberglass yarn & Silicone rubber2. Color: White, black and brick red in primary,other colors as per the customer’s requirement3. Appearance: lubricity in appearance, the silicone rubber coating is equal4. Product Code:FRS-3 Silicone Rubber Fiberglass Sleeving Breakdown Voltage 4.0kvFRS-4 Silicone..
 
Name: foil bubble insulation structure: al foil +bubble+al foil max width :1.25m use:building aluminum foil bubble insulationfoil bubble insulation, heat insulation material , building thermal insulation material , home insulation ,we produce is a new kind of building material , which is widely used by Europe , North America and..
 
3M 33+ tape PVC electrical insulation tapespecification: 0.18mm*19mm*20.1m 100rolls/carton0.18mm*1210mm*10m 8rolls/carton0.18mm*1210mm*20m 8rolls/cartonFeature: • UL Listed; UL 510 Standard “Insulating Tape” (product category OANZ), File E129200• CSA Certification; Standard C22.2 No.197–M1983..
 
Specifications1. high Adhesion Strength2. super Holding Power3 good Conductivity4. CTI certificated.Main specification: Ref.noBasic clothThickness of Alu. foil(micron)Overall..
 
epoxy fiberglass tube1. consistent cross section2.high corrosion resistance3.wide temperature range 4.UV resistant insulativeDescription:Filament wound composite products made of glass fibers and epoxy resin have besides very good mechanical properties and fair temperature resistance also excellent electroinsulative properties.it is a glass..
 
PET Polyester Mylar Film for electrical insulation Thickness:≥12uWidth:5mm-1000mm,adjustible to customers' requirementsID:53.5mm±0.5mm or 76mm±0.5mmOD:300mm-400mmColor:Clear ,MilkyThickness,Width,ID,OD Can be customized as customer's requirement.Usage:Suitable for printing, packaging, metalizing, aluminizing, lamination,..
 
Product Description R-5441-1S Mica Tape consists of mica paper, 155°Cadhesive, polyester film. It is used in strand insulation of conductor. Packaging & Shipping box with the wooden pallet Company InformationEstablished in 1992, Rota Group is one of the most professional manufacturers of impregnating varnish, mica tape, potting..
 
 
 

Resources