Electrode paste is used in closed electric smelting furnace as continuous self-baking electrode to produce calcium carbide, ferroalloy and so on. During the furnace operation, electrode paste acts as current conductor.

Our electrode paste has following characteristics:
1. Lower ash content;
2. Acurate dosing and stable volatile content;
3. Good electric and thermal conductivity and the sintering speed apropriate to that of consumption of working end;
4. Smelting at lower temperature with certain fluidity and homogeneous composition;
5. High resistance to high temperature, oxidation and thermal shock, low resistivity and high mechanical strength after sintering.

The properties of electrode paste are as follows:
Ash < 5%
Volatil material 12-15. 5%
Compressive strength> 18Mpa
Electric resistivity <70micro ohm m
Bulk density > 1.38g/cm3
Size: 100*90*60mm

We can offer electrode paste as your special properties demand.Our electrode paste exported to South-America, South-East Asia, Midd-East, etc.