Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.

Body of sectional door is forming by 41 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m²).

Industrial sectional door systems, provides loading and unloading seamlessly and securely in the enterprises with co-administered self-leveling ramps and PVC bellows compressor truck chassis. Industrial sectional door systems provide space-saving with opening parallel to the ceiling.

And door opening can be used clearly . Industrial sectional door systems produces in accordance with the transition range and the height in the factory buildings or warehouses.

Industrial sectional doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, high and guillotine bearing options).

The panels in standard white (RAL9002) of industrial sectional door systems can also be applied in different RAL colors in accordance with the exterior of the building. Sectional doors play an active role in vehicle and pedestrian traffic and also can applied with standard buttons, pull-chain type of manual or remote control.Industrial sectional doors consists of steel sandwich panels.Sandwich panels is achieved by injecting polyurethane with high-pressure between the galvanized steel sheets.Provided excellent heat insulation thanks to the high-pressure polyurethane.In the door panels can be opened double-walled acrylic glazed windows for lighting.

Industrial sectional doors can easily be opened manually by 380 V-AC/50 Hz electric motor or thanks to torsion spring system that balances the weight of the door.The springs are made to be durable of 25 000 times action.

Industrial sectional doors;

Minimum beam width = 450 mm for standard bearing
Minimum beam width = Door height + 1000 mm for high bearing
Minimum beam width = Door height x 2 For the vertical bearing field is required.
Standard features used in doors;
Rope break safety system
Spring set to double-spring
Spring buffers
2 “galvanized steel rail set
Aluminium top of the sealing profile
Aluminium profile of the lower support
EPDM bottom of the seal
EPDM top of sealing gasket
Hollow shaft with a keyway
Solid shaft with a keyway
6000 mm wide 65 mm omega wind reinforcement is used for doors
Door Handle
Back connector C-profile
The bottom seal
The side seal