Forklift bearings Brief introduction

Forklift bearings are a very important applications in forklift hardware parts, forklift bearing forklift work plays an irreplaceable role.

Forklift different bearings and plain bearings in general, done on bearing materials, performance should be better than the general bearing. Industrial handling vehicles are widely used in ports, railway stations, airports, freight yard, factory, workshop, warehouse, distribution center and distribution center, and access to the cabin, cabin and container pallet cargo loading and unloading, handling operations. Pallet transport, container transport essential equipment. Forklift plays a very important role in the enterprise logistics system, is the main force in the materials handling equipment. Stations, ports, airports, factories, warehouses and other economic sectors, is widely used in the mechanization of loading and unloading, stacking and short-distance transport of highly efficient equipment. Self-propelled forklift 1917. During World War II, forklifts development. From the early 1950s, China began manufacturing forklifts. With China's rapid economic development, the material handling of most enterprises have been away from the original manual handling, replaced by a forklift mainly mechanized handling. Therefore, in the past few years, the demand for Chinese forklift market every year at double-digit speed growth.

Forklift bearing lubrication

Forklift bearing lubrication, first open the cover and watch to check the release bearing wear, if they are recognized bearing no damage or wear is not overrun, remove the clutch pedal adjustment mandrel release bearing and its seat back to the last position,butter filling to the bearing hole with a needle nose grease gun until the bearing oil spill, then slightly turn the bearing oiling again, repeat the above work, a little butter until around the bearing has an overflow, and then the bearing rotation observed oilIf you feel the the bearing rotation resistance,that bearings have been filled with butter. Then clear separation of a small amount of butter, and re-adjust the separation bearing position throughout the bearing seat overflow

Forklift bearing Model

Forklift bearings due to its special purpose, the the forklift bearing model is not a lot, the most common are:

80711Y, 80711K,

980811,980811 NT,

30311,10311 T,

180705K, 180706K, 180708K and so on.

Forklift bearing Precautions

1, To keep the forklift bearing its surroundings clean
Even if the the invisible smile dust into the forklift bearings will increase IKO bearing wear, vibration and noise.
2, Using the installation to be carefully
Not allow powerful punch forklift bearing, does not allow a direct hit with a hammer, and not allowed to pass through the rolling pressure.
3, The use of appropriate, accurate installation tools
To make use of a special tool, and tried to avoid using something like cloth and short fiber.
4,To prevent the corrosion of forklift bearings
Handle forklift bearing directly to wash hands sweat, and coating quality mineral oil and then operate, with particular attention to anti-rust during the rainy season and summer.
However, in some special operating conditions, forklift bearings can get a longer life of traditional computing, in particular in the case of a light load. These special operating condition is that, when the rolling surface (track and the rolling member) by a lubricant film effectively separated and limit the pollutants may cause surface damage.

Forklift bearing Drawing

Sales points/ Focus :

Quality assurance both for our products and service for after-sales

Favorable price

Great variety of products

Attractive design

Environment Friendly Technology

OEM and ODM service provided

Certificate:

Contact

We will reply your email or fax within 24 hours You can call us at any time if there is any question on our production.