EDI plant for for pharmaceutical/electronic/electricity/chemical industry

Location:
Beijing, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:

Product Description

EDI plant for pharmaceutical/electronic/electricity/chemical industry

EDI water treatment equipment
Higher produced water quality
Utilization rate >95%
EDI controller,EDI water treatment

Product Description

2>water treatment equipment Advantage of EDI plant:

1.Has higher producing water quality
2.High rate of desalination
3.Utilization rate reach up over 95%
4.Resin doesn't need to regenerate
5.Convenient: Run\operate\maintain
6.It has standard design, Module can be piled according to requirements of proudcing water, to adapt requirements of more water yield
7.It has Low operating cost, low consumption, when produce 3.8m3, it costs 1KW

8.Stable effluent water\low operating cost\convenient management\small foot-print, etc.

3>Water application of EDI plant:

1. Suitable water source: Tap water, surface well water,

2. Inlet water TDS limit: Below 2000PPM(for other water source, please provide us water report for detailed analysis for choosing RO membrane)

3. Water recovery rate: 70%

4. RO membrane salt rejection rate: 99%

5. Treatment water TDS range: 30-50ppm(bottled water standard)

6.reverse osmosis drinking water system,reverse osmosis water filtration system,commercial reverse osmosis system

4>Reverse Osmosis System Installation:

1. Raw water pump-provide the pressure to silica sandfilter/active carbon filter

2. Silica sand filter-get rid of turbidity, suspended mater, organic matter, colloid and so on.

3. Active carbon filter-remove the color, free chloride, organic matter, harmful matter and so on.

4. Micron filterprevent any deposition of large Particles, most of the bacteria, and viruses into the RO membrane, the accuracy is 5 um, for holding back any large particulates such as large iron, dust, suspended matter, impurity.

5. High pressure pump-provide the high pressure to RO membrane(at least 2.0Mpa)

Parameter of EDI plant

Model

Output water

(m3/h)

Concentrated water capacity

(m3/h)

Electrode Water

(m3/h)

Voltage

(V, DC)

Current

(A,DC)

SY-EDI-0.5

0.5

0.04-0.21

0.04- --0.06

35-50

2-6

SY-EDI-1

1

0.09-0.36

60-90

SY-EDI-2

2

0.18-0.66

115-180

SY-EDI-3

3

0.3- 1.08

180-300

SY-EDI-6

6

0.6 -2.16

360-600

SY-TLQ-12

12

1.2-4.32

720-1200

SY-TLQ-24

24

2.4-8.64

1440-2400



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Water Siyuan Group Co., Ltd.
Phone Number:
  86-311-85894444
Fax Number:
 86-311-85874444