All
Home > Products > Chemicals > Resin - 265 Products
 
[Physical and chemical properties] The product is produced through the process of refinement,isolation ,polymerization and molding with the raw material of carbon five which is the by product from the ethylene fragmentation. The product is pale yellow granular solid, an aliphatic petorleum resin, which is widely used in hot-melt road paint,..
 
Road Marking Resin Description:Road Marking resin are made from rosin resins, polymers, unsaturated fatty acid and polyol and other materials through condensation, esterification then adding heat stabilizers, light stabilizers to get the system of irregular semicircle granular solids. Performance characteristic:The resin product is according to..
 
Good compatibility with SBS, SBR etc. APPEARANCE: Light yellow, yellow Properties :high soften point,stain resistance, excellent wear resistance, excellent adhesive properties. itemindexmethodstandardAppearanceGranularVisual check Softening point100~140°CBall and Ring MethodGB4507-84Acid value<1(mgKOH/g)titrationGB2895Color..
 
Polyurethane resin Technical Specification:TypeHY-PU30HEAppearanceColorless or light yellow liquidViscosity(mPa.s 25°c)600-1500Solid Content (%)30+2SolventEthyl Acetate, Isopropyl Alcohol DilutionHY -PU30E polyurethane printing ink link agent completely dissolves in the alcohol and ester, ketone solvents. To make up printing ink,..
 
Phenolic Resin BX-1722Description: The product are made from rosin and phenol (BPA) and formaldehyde with condensation through esterification with glycerol (pentaerythritol), then get the irregular solid transparent sheet after the vacuum system. Performance characteristic:Good solubility,good fluidity,high softing point and good gloss...
 
General Description CAS No. 9002-86-2Polyvinyl Chloride or PVC resin SG3, SG5, SG7 and SG8 are homopolymers made by suspension polymerization. PVC resin is white powder form thermoplastic..
 
Characteristice: A high molecular weight resin having a composition of approximately 86 percent vinyl chloride and 14 percent vinyl acetate. LC-13-1 offers a desirable balance of chemical resistance, solubility, film strength, and thermoplasticity, has a good adhesion on paper, acrylic resin, PVC, ABS and PC, etc.Solubility: LC-13-1 is..
 
Bond concrete,procelain,wood,mental,stone,glass,etc. Tube A (Base)and Tube B(Harder)12G/set; 20G/set 24sets/box The Curing time:5 minutes
 
Epoxy resin / epoxy fixings / chemical bolts Specification & Features:1. MATERIAL: VINYLESTER (EPOXY ACRYLATE) RESIN, STYRENE FREE2. HIGH STRENGTH3. EXCELLENT RESISTANCE TO ACID AND ALKALI4. CAN REPLACE CHEMICAL ANCHOR CAPSULES5. SPECIAL APPLICATION TO WET HOLES6. SUITS STANDARD 10-1 RATIO APPLICATOR7. SHELF LIFE: 18 MONTHS8. AVAILABLE..
 
SOLID ACRYLIC RESIN BM66 Product Description of Solid Acrylic Resin Appearance-----------------------------------------------------White granularSolid Content(%)------------------------------------------------100Softening Point(°C)----------------------------------------------130-150Acid..
 
FLORA flexible photopolymer are essentially Methacryl-Urethane Photosentitive resin. The resins polymerise when exposed to ultra violet source of light energy. The polymerisation process occuring in plate making equipment convert liquid resin in to elastomer plate. This plates are used for making rubber stamps and making polymer plate for..
 
Solid Epoxy Resin1. Description: Epoxy resin series is Bisphenol A -type solid epoxy resin, The molecular weight: between 13002000; Solid state in room temperature; with fine chemical stability, strong adhesion and excellent electric insulation.Appearance: pale yellow or colorless transparent solid.CAS No.: 25036-25-32. Technical Data..
 
[Product Name] Vinyl Silicone MQ Resin RH-S11[Main Composition] Vinyl Silicone Resin[Basic Character]Appearance: Transparent liquidM/Q Rate: 0.8Density(25)0.89 0.95Contents of Vinyl (wt %): 0.6~1.0Content of Solid: 68%[Special property]This product is a little crisp and with high solidifying degree. It little in the solidifying procession..
 
TACKIFYING RESIN is a rosin resin developed by Haixiers own technology. It provides excellent polymer compatibility, Compatible with EVA polymers, SIS, SBS, SBR and etc. It can be used as a tackifier in adhesives and rubber products industry. Characteristics Excellent tack, internal cohesionwo xia Excellent thermal resistance Good..
 
Product Description Packaging & Shipping Our Services Company Information FAQ 5225A-KL/B8Adopt advanced high-technology and good quality raw materials to produce epoxy resin, it has perfect mechanical and insulation performance,good application technology ,brightness surface, low dissipation factor, flame retardant to UL94V0 and..
 
Before potting,package Aand B of the WCC-5217 model must respectively vacuum deaearated,then should be mixed by high speed stirring.WCC-5217(M) is suitable for deaearated potting process or hand-made potting process after package A and B are mixed.Component A:vacuum deaearate with stirring for 4-6 h at 60±5 and 1-3 mmHg of absolute..
 
* Excellent solubility and compatibility, enabling them to be used in many types of coating formulation.* Improve gloss, hardness, adhesion and yellowing resistance, depending application.* Suitable for producing all-purpose pigment preparations.The low viscosity of its solutions enables high- pigment-content pastes to be produced.* Good heat..
 
Molecular Formula: (C6H6O•CH2O)x Molecular Weight:134.133 Specification: AppearanceTransparent lump solid with light yellowSoftening point (R&B)105 ± 5°CFree phenol ≤ 1.5%Oil solubility(1:2Tung oil)240°CCompletely solubleHydroxymethyl 11.0 ± 1%Moisture≤ 1.5%Ash content≤ 0.3%Property and use:The quality of..
 
Features: 1) Appearance: white or pale yellow flake 2) Color (50% DMF): max. 2 3) Acid number (mg KOH/g): 29 ~ 35 4) Softening point: 100 ~ 115°C 5) Glass transition temperature: 62°C 6) Melting viscosity (175°C, cone/plate, MPa.s): 3,200±800 7) Reactivity at 180°C (s, 50% epikote): 190±30 8) Recommend formulation:..
 
TIONES® 5100C Technical DataApplication: TIONES® 5100C is suitable for the processing of plywood, particle board, MDF&HDF, multi-ply wood engineer flooring and the other wood production1. Product SpecialtyTIONES® 5100C is Urea formaldehyde Resin Powder as binders special for woodworking processing. It owns high bonding..
 
 
 

Resources