ozone concentration meter is easy to transport.

Ozon water measurement for experiment

and inspection

Lightweight and portable. Thanks to the internal pump, only a small flow rate is necessary for successful, continuous measurements. Perfect for experimental and inspection monitoring.

Features

- Lightweight and Compact
The unit weighs only 5kg including the built in pump and flowmeter.Extremely portable.

- Simple Measurement Method
No complicated sampling methods necessary.
Not only are measurements accurate with a low flow rate, but continuous measurements can

be taken in real-time.

- Operability
Equipment inspection and service are very easy, thanks to the simple design and the span

calibration and internal check board

- Output
Equipped with standard (isolated) voltage output DC0~1V.

- Condensation Countermeasures
Internally mounted anti-condensation unit prevents malfunction due to condensation at start up.

* Annual calibration and lamp replacement are required
* Cannot measure sewage or turbid water.

- Product Name: ozone measurement for experiment and inspection

- Measurement Method: Ultraviolet absorption spectrophotometry
- Port Size:Rc1/8(IN / OUT)
- Power/Power Consumption: AC100V±10% 50/60Hz/About 50VA Please also secure

a transformer suited to the electric power characteristics at your location.
- Price per unit
1ppm Model:$23,000
30ppm Model:$19,000
120ppm Model:$30,000 *Varies by rate.

Product Back