Omron Solid State Relay for Heater Control G3NA-220B AC200-240

Product classificationOperating Rated VoltageOperating Voltage RangeInput ImpedanceMust Operate VoltageMust Release VoltageIsolationOutput FormRated load voltageLoad Voltage RangeLoad CurrentInrush Current ResistivityOutput ON voltage dropLeakage currentAmbient temperatureAmbient humidity

Solid State Relay for heater control

200 to 240 VAC

150 to 264 VAC

72 kOhm +/- 20% (at 25 CEL)

150 VAC Max.

40 VAC Min.

Photocoupler

SPST-NO

24 to 240 VAC (50/60 Hz)

19 to 264 VAC (50/60 Hz)

AC: 0.1 A to 20 A (With heat sink (at 40 CEL)) AC: 0.1 A to 4 A (Without a heat sink (at 40 CEL))

AC: 220 A (60 Hz, 1 cycle)

1.6 V (RMS) Max.

5 mA Max. (at 100 VAC) 10 mA Max. (at 200 VAC)

Operating: -30 to 80 CEL Storage: -30 to 100 CEL (with no icing or condensation)

Operating: 45 to 85% RH (with no icing or condensation)

Characteristics Operate timeRelease timeProtection for outputZero cross functionIndicatorInsulation resistanceDielectric strengthVibration resistanceShock resistanceApplicable standard (UL)Applicable standard (CSA)Terminal structureTerminal strength (Clamp torque)MountingWeight

3/2 cycle of load power source + 1 ms Max.

3/2 cycle of load power source + 1 ms Max.

Varistor and Snubber

Equipped

Equipped

Between input to output: 100 MOhm Min. (at 500 VDC) Between heat sink to input/output terminals: 100 MOhm Min. (at 500 VDC)

Between input to output: 2500 VAC 50/60 Hz for 1 min Between heat sink to input/output terminals: 2500 VAC 50/60 Hz for 1 min

10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) in each 3 directions for 2 hours

1000 m/s**2, in each 6 directions 3 times

Standard No.: UL508, UL1950 File number: NO.E64562

Standard No.: C22.2 NO.14, C22.2 NO.950 File number: No.LR35535

Screw

Input terminal: Recommendable fasten torque M4: 0.98 to 1.47 N.m Output terminal: Recommendable fasten torque M4: 0.98 to 1.47 N.m

Screw, Panel, Panel (DIN track)

Approx. 60 g