- Abrasion resistant and anti fingerprint clear paint chemical agent -

1. Coating with our product forms a thin nanometer level film that boasts

a low-energy surface, preventing fingerprints from adhering easily,

and making cleaning simple.

2. The coating adheres to glass and provides abrasion-resistance. T

he product adheres well to plastic with the use of a special pretreatment agent.

3. The low friction coefficient produces a very smooth surface.

Perfect for touch-screens.

Product Description

The right half of the glass in the picture is coated with our product –

when writing on it with an oil-based pen, the ink is repelled,

making it impossible to write on the glass.

The significance of this is that the oils and residue left behind by fingerprints are

repelled in the same manner.

Additionally, marks can be wiped completely clean with such materials as tissue paper.

This graph shows data from an abrasion-resistance test.

The graph indicates that the coating retains its properties even after 10,000 rubs.

The coating forms a chemical bond and adheres tightly to glass.

The composition of the film is as shown in the diagram.

This is comparative data gained comparing our product with that of our competitor.

Although FluoroSurf does display lower numbers in the water contact-angle,

this is completely different from the actual function – ease of wiping away ink and dirt.

This function is correlated to data known as the sliding-angle (SA).

What is the sliding-angle?
When measuring the contact angle, a stage is gradually tilted and the angle at which

liquid begins to slide off is called the sliding-angle. T

he sliding-angle is dependent upon gravity and the energy with which a liquid adheres to the surface. If a liquid or source of dirt has a low ability to adhere to an object,the liquid will slide off at a low sliding-angle.

The coating has an extremely thin film, and when it ages,

its composition breaks down on a molecular level.

Though this can't be seen by the naked eye, the sliding-angle gradually rises,

making it harder to get rid of marks.

This can be seen in the picture and it can be deduced that the fluorine components are

at a decreased level. In such a situation, by applying a fresh coat over the old one,

components adhere to the surface again as shown in this diagram,

and this means the coating's beneficial properties can be restored with ease..

Our product has a strong track record as an anti-fingerprint coating for

touch screens on tablet computers and smartphones.

Furthermore, our product is being used these days by coating specialists as a guard

against dirt and impurities for automobile bodies, improving their durability.

For a substantial number of years, such a coating will liberate us from the troublesome

task of applying wax and allow us to remove dirt simply with water alone.

Company Information