Ventilation fan,Exhaust fan,Centrifugal fan,Draught fan

Location:
Q, I N
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

CBL series marine explosion-proof axial centrifugal fans

1. Preface

CBZ series explosion-proof axial centrifugal fans for marine use are designed and manufactured according to GB 11799-89(Marine Explosion-proof Axial Centrifugal Fans), and general description and explosion-proof electrical equipment d of GB3836-83 Electrical apparatus for explosive atom-spheres and Regulations for the Construction and classification of Sea-going steel ships.

2. Application

They can be delivered for gas mixtures or vapour containing combustibles and explosives, for ordinary air, for sea air containing salt fog, for air containing oil fog and other corrupt air supply or extracition.

Theses explosion-proof fan series are best suited to pumping out gas mixtures or vapour containing combustibles and explosives in oil cabins holds, pump-rooms, battery cabins, ammunition cabins, hangars, paint houses, etc . They can also be used for ventilation of other compartments of shipping and corresponding place of land's.

AC 50HZ, 380V or 60HZ,440V type YB-H (

Explosion-insular) or type Y-H (ordinary) three-phase asynchronous motors for marine use may be mounted on these fans

3. Operation Conditions

For places where there are explosive gas

mixtures of grade

Ambient temperatures: -25 ~ +50

Relative humidity of the air: ≤95%

Cyclical vacillation: 22.5°~ 45°

Sustained horizontal tilting: ±15°

Sustained vertical tilting: ±10°

Vibration: existent

Shock: existent

4. Structural Types

There are two structural types: type I (motor-direct-driving type), type II (Separate cabins type).The construction is spark free.

The structure of type I is a motor-direct driving one, the vane wheel is mounted directly to motor-shaft, and the housing is fixed on the flange of the explosion-proof motor.

The type II is a separate structure, i.e. the fan and the motor are put into different cabins, with a driving device, a pairs of flexible coupling, and the driving device consists of bearings, bearing-box, shaft, brass rings, stuffing, it can be oiled and measured temperature, one side is fixed on the fan, and the other side will be mounted on the bulkhead.

The fan may be made into a horizontal or vertical, single-stage, single-drawing and airtight structure by the customers requesting.

The fan can be made into a counter clock-wise rotating type or a clockwise one.

The counter-clockwise rotating type (Left turning type)-Taking a front view from the motor side, you will see the vane wheel turns counter-clockwise. We use L to indicate it, and by the same way, the clockwise rotating type can be indicated as R.

The outlet position of the fan, according to the rotating direction of the vane wheel, is made into the following main types, by your requesting the outlet position is allowed to use other types, the angle of which is 30°or 22.5°

5. Features

Explosion-proofsafe and reliable in operation.

Small in size, light in weight,20horizontal or vertical, single-stage, single-drawing and airtight structure by the customers requesting.

The fan can be made into a counter clock-wise rotating type or a clockwise one.

The counter-clockwise rotating type (Left turning type)-Taking a front view from the motor side, you will see the vane wheel turns counter-clockwise. We use L to indicate it, and by the same way, the clockwise rotating type can be indicated as R.

The outlet position of the fan, according to the rotating direction of the vane wheel, is made into the following main types, by your requesting the outlet position is allowed to use other types, the angle of which is 30°or 22.5°

5. Features

Explosion-proofsafe and reliable in operation.

Small in size, light in weight, and low in noise.

Well anticorrosive.

Strongly capable of resisting vacillationvibration and shocking.

COMPANY INTRODUCTION

Our company,Qingdao Chunhao Air Blower Ventilation Equipment Co., Ltd. is located in the Scientific Technology Park of Shinan District, Qingdao. We are in the west of Laoshan scenic spot and are in the southeast of Qingdao Liuting International Airport. Our company is a specialized company in designing, producing, and serving ventilators for ships and other aeration facilities.

Our products - JCL(CLQ), JCZ(CZ), CBL, and CBZ aeration facilities have been CSS certified by the Anti-Explosion Examining Centers of ABS, BV, DNV, GL, KR, LR, NK, and RINA.

Our company has been awarded the International Quality Management Certificate ISO9001:2000 with complete manufacturing equipment, advanced technologies and perfect testing facilities and methods. Our company has an expert group for designing and manufacturing, and is composed of one professor (part-time), 4 senior engineers, 11 secondary engineers, 2 technicians and 21 skilled artificers. We are also engaged in designing and manufacturing whole sets of aeration systems for air exchange, dust cleaning and air power transportation.

Holding the tenet of "credibility" and sticking to the policy of "credibility leads to a better future", our company will speed up technical innovation and product designing and reward our customers with excellent products and service in the following days.

We warmly welcome all the customers from at home and abroad to visit us and we are sure that we will have a better future with our faithful corporation.

Tel:86-532-87973827

Fax:86-532-87973667

ADD:No.318A,Jiushui Road,Licang District,Qingdao,Shandong province,China



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Qingdao Haiying Marine Equipment Co., Ltd.
Phone Number:
  86-532-66853397
Fax Number:
 86-532-66853365