The Working Principle And Advantage Of Electromagnetic Induction Lamp

Electromagnetic induction lamp is a light source that combining the principle of electric-magnetic induction and gas discharging. Since there is not electrode and filament inside the lamp, another name of this lamp is called "electrode-less" lamp. The life time of electromagnetic induction lamp can be up to 100,000hrs. Which is 100times of incandescent lamp, 5-15 times of HID (high intensity discharge) lamp and 5-10 times of CFL (compact fluorescent lamp).

The working principle of electromagnetic induction lamp:

It will transfer the supplied energy into the lamp by coupling the induction from an AC electric-magnetic field, and then create an electron avalanche of the inner filling gas to make it into plasma status. When the excited atoms under plasma stuaus return to the ground state, it will emit UV radiation at 253.7nm. The phosphor on the inner side of the bulb wall will get excited by this UV radiation at 253.7nm, and then create visible light.

The advantage of electromagnetic induction lamp:

Energy saving more than 75%; Ultra-long life no replacement needed, save material and labor; Environment friendly, using solid amalgam non-mercury pollution, meets the requirement of environmental protection; Good color rendering, close to sunlight and protect the eyes; No flash, no glare, protect the eyes not to be tired; High power factor, few energy loss, energy-saving; The life will not be affected even if switch on/off frequently, the light output will not decline as the fluorescent lamp during life time; Good electrical specifications, use the IC chip design, high power factor, low current harmonics, steady voltage supplying, steady output of luminous flux; Optional color temperature and natural color; Can be made to colorful versions for wider application; Instant start without preheating, Prevent from the illumination interrupt by the reason of power cut, it can quickly start, be suitable for the emergency lighting without preheating; The electromagnetic interference (EMC) conforms to the IEC standard;

The features of lnduction explosion proof lighting:

low freiquency induction explosion proof lighting, replace tradional lamp, more affordable; die-casting aluminium body, surface finished with electrostatic spraying technology; aluminum reflector, better reflection effect; tempered glass or PC cover, excellent light transmittance;high temperature resistance good quality silicon rubber sealing ring for IP65 grade;low frequency rectangle type induction lighting source, the explosion proof lamp will possess a performance of high efficacy, long lifetime, fine color rendering, smooth look and uniform luminous flux output;aluminum alloy cover induction lamp ballast with a performance of high power factor, no flicker, low dissipation and constant power etc.

Magnetic Induction lamp replace traditional lamps, please reference the following parameters:

lighting source	traditional Lamps	.	induction Lamp	.
	rated power	actual power	rated power	actual power
HPS	70W	84W	40W	40W
.	100W	120W	60W	60W
.	150W	180W	80W	80W
.	250W	300W	150W	150W
.	400W	464W	200W	200W
MH	70W	84W	40W	40W
.	100W	120W	60W	60W
.	150W	180W	80W	80W
.	250W	300W	150W	150W
.	400W	460W	200W	200W
HPM	80W	100W	40W	40W
.	125W	150W	60W	60W
.	160W	192W	80W	80W
.	250W	300W	120W	120W
.	400W	460W	150W	150W
.	450W (self-ballast)	450W	200W	200W

...