ductile iron pipe

Specifications:

1) The standard of pipe: ISO 2531 - 1998, EN545-2002 , K9

2) Effective length: 6M when using bulk shipment way, or about 5.5M or 5.7M when in 20' container shipment way

3) Inner cement line: Portland cement lining as per ISO4179

4) Zinc coating: at least 130gsm as per ISO 8179

5) Bitumen painting: at least 70um as per ISO 8179

6) Gaskets are NBR rubber, natural rubber, SBR rubber or EPDM rubber tightness ring as per ISO4633

7) DN 80 - 1,200 mm

8) High strength, lighter than gray iron, good corrosion resistance, no furring, small flow resistance, easy fixing, long life time

9) Checked by automatic inspection equipment

10) Composition: a) C: 3.4 - 3.7% b) Si: 2.0 - 2.4% c) P: <0.08% d) S: <0.015

11) Pull strength: >420MPa

12) Yield: >10%

13) Hardness: <230HB

14) Process and testing:

a) Blast furnace (Analysis of raw materials test )

b) Mg treatment (Micro & chemical composition test)

c) Pipe spinning (Temperature test)

d) Heat treatment (Micro structure; Flattening test)

e) Zinc coating (Thickness testing)

f) Dimensional checks (Thickness & Dia. testing)

g) Hydraulic test (Pressure test)

h) Internal lining (Thickness testing)

i) External coating (Thickness test)
Packing: in bulk or container

1.Factory Show

2.Product Show

ductile iron pipes

Steel pipes

PE pipe for sewage

PVC pipe for sewage

3.Process

4.If you have any problems, please feel free to contact us!