Product Description

KS-BOND® EP119 is a kind of Epoxy adhesive with double component and cure at medium temperature, perfect for potting, encapsulating and bonding transformer, switch, various sensor, electric, electronic component, etc; especially for PVC materials.

Properties:

item	EP119A	EP119B
Appearance	Black viscous liquid	yellow liquid
Component	Epoxy resin	Modified amin
Viscosity(mpa.s/25°C )	10000-40000	5-100
Solid content	100	100
Mix ratio (weight)	4	1
Work time	>100minutes(100g)
hardness(shore D)	>78
volume resistivity (25°C)	>1013Ω.cm
Surface resistivity (25°C)	>1013Ω
Total curing time	25°C*7days
Total curing time	50°C*8 hours

Directions for use:

Clean the surfaces to be bonded firstly.Mix ratio by weight :part A: part B=4:1. Stir evenly and use it up in work time.

Caution:

1.If there is the stratification in EP119A, it’s a normal phenomenon. Stir it before using.

2.Don’t put the tool which touched A into the B packing. Or it will make the A useless. And vice versa.

3. Stir evenly and use it up in work time.

4.Pay attention to the temperature, the higher temperature make the less working time.

5.Pay attention to the mixing quantity, the more quantity make the less working time.