Hot Sales Bluetooth APP BLE 4.0 Vtag Bluetooth Security ibeacon

IPHONE Ipad and Android Smart Phone Bluetooth Sticker

Start Guide:

1.Download the latest version of the Bluetooth Stickers App from the App Store.

2.Open the App and go to Locator Management->Add a new sticker (Please be sure your Bluetooth Sticker is very close to your cellphone. )

3.You may need to wait about 30 seconds for the sticker to be checked.

4. After that, you can start to use your Bluetooth Stickers.

Current support smart phones:

IOS system: iPhone4S, iPhone5, iPhone5S, iPhone5C, iPad3, iPad4, Ipod Touch 5, the new iPad, iPad mini and the latest versions.

Android: Samsung Galaxy S3, S4, S4 mini, Note2, Note3 and the latest versions.

Support in the near future: HTC One, HTC DNA, HTC One X+, Millet S2 and Meizu MX2 phones.

Add a new Sticker:

1. You can add a new Sticker In the Add Device Interface-> Click “Scan”, then choose to add the sticker.

2. Input a name for the Sticker (so that you can view easily in the future). (Must)

3. Input a description for the Sticker (so that you can learn the role of the sticker by reading the description). (Not must)

4. You may need to wait about 30 seconds for the sticker to be checked.

5. Now, you can manage the stickers.

After your Sticker is added:

-Name the sticker inside the Bluetooth Stickers App and confirm it is working properly.

-Ensure the surface you would like to stick the Bluetooth Sticker to is clean, This is very important as microscopic dust will prevent the adhesive form proper bond.

-Peal back the label of the sticker,place it on the clean surface, and press hard for a few second, Allow the adhesive one hour to bond 50% and 24 hours to bond 100%

Do not open the Bluetooth Sticker unless the battery is dead. To replace battery:

-The bottom cover of the Bluetooth Stickers can be opened,in order to replace the battery. There is a small gap on the side of the Bluetooth Stickers between the top cover and lower cover,With your nail, slightly pull the bottom cover off.Remove the old battery and place the new CR-2016 Battery. To close the cover, Align the bottom cover first. There is a small dent on the bottom cover.Align the dent to be on-top of the matching area on the Bluetooth Stickers.

-Battery:CR2016 watch battery

-Temperature Range:10F to 150F(-10C to +65C)

Stickers Management:

1.In the Management Interface, you can manage the Stickers.

2. Click the Info button to view information about the stickers. In this interface, delete and other operations can be done.

3. You need to connect the sticker first then Light and Ring buttons are available.

4.Please disconnect the sticker if you do not use Light and Ring.

5.If you do not disconnect the sticker, the system will automatically disconnect for you after a few minutes, so that you are able to continue to detect the location of stickers.

Get the distance between the Locator and Your Mobile phone:

- We use stickers position to locate your item location.

- You can easily found the current distance between your Smart Phone and Sticker in the Locate Interface.

- Distance may not be accurate. It depends on your specific location. When you are in a room, the distance shown may be slightly larger. This value is for reference only and do not represent actual distance.

- When the status is ‘Lost’ in the Locate Interface, it means that your sticker has been lost.

Bluetooth Stickers Alarm System:

- You can choose whether to alarm, when the switch is off there are no alarm can be triggered.

-Detection distance can be selected.

-If the distance is set to 'Edge', an alarm can be triggered when a sticker is Lost or Found.