Only need know the diameter and the diameter of the feed device is the same, you can select the wood log crusher machine

1. Forestry machinery processing equipment wood log crusher machine introduction

The wood log crusher machine is special equipment for the production of wood chips. The wood chipper is widely used in the production of particleboard plant, high-density fiberboard factory, stubble factory, biomass power plant, wood chip plants and other industrial manufacture.

This wood log crusher machine structure is technically advanced with high-quality production, wide range of raw materials, easy operation and maintenance. The main raw materials for cutting are small-diameter woods, non-wood raw materials (such as sugar cane, reeds, bamboo, etc.), processing residues (such as branches, branches, slab, planks, logs core, veneer waste).

The wood log crusher machine consists of machine body, knife roller, upper and lower feed rollers, conveyor belts, hydraulic systems and other components.

Body is welded by high strength steels, thus the whole base is stable.

The knife roller installed with two, three or four flying knives and fixed knives. Pressure block fixed the knives on the knife roller. According to the different size of the cutting material, the upper feed roller assembly can fluctuate within a certain range by means of a hydraulic system. Qualified flakes can be cut off and passed through the screen mesh then discharged from the bottom, large flake materials will still be cut inside the machine.

Hydraulic system: from the oil pump to the fuel tank, you can start the cover for blade replacement; when maintenance are needed, you can lift the upper feed roller assembly and easily adjust the space between the throwing knives and fixed knives and disassemble the comb plate.

2. Forestry machinery processing equipment wood log crusher machine Configuration Table

3. Forestry machinery processing equipment wood log crusher machine

The knife roller installed with two, three or four flying knives and fixed knives. Pressure block fixed the knives on the knife roller. According to the different size of the cutting material, the upper feed roller assembly can fluctuate within a certain range by means of a hydraulic system. Qualified flakes can be cut off and passed through the screen mesh then discharged from the bottom, large flake materials will still be cut inside the machine.

4. If you are interested in the Forestry machinery processing equipment wood log crusher machine, please contact us

JINAN SHARE TRADE CO., LTD (of SHARE TRADE GROUP)

ADD: Room 503, No.1 Building, Dream Yard, High-Tech Zone, Jinan, Shandong Province, China

TEL/FAX: +86 531 62318650

MOB: +86 186 601 78578

SKYPE:chinasharegroup

WEB: www.jnshare.com