WDM 10/100M Media Converter

Overview

BC-100S Series is a single fiber bidirectional media converter of high performance, fulfills bidirectional communication with single fiber .It features high stability, with reliability much higher than that of the transceiver adopting the common external WDM device on the market.

BC-100S Series can interconvert the electric signal of 10/100Base–TX twisted pair and 100Base-FX optical signals. Bidirectional communication achieved through a single fiber boosts the utilization rate of optical network and greatly reduces the number of fibers used. This extends the limit of network transmission range from 100m over copper wire to 80Km (only through one single mode optical fiber).And the newly added function of lightning protection guarantees the safety of equipment.

Outside power supply, inside power supply Optional

AC 220V, DC-48V Optional

Product features

1 Single fiber bidirectional technology economizes optical fiber and lowers the cost of tailored construction.

2 Self Adaptive

3 BC-100S Series provides the adaptive function of 10/100M rate and full/half duplex, significantly protects the existing network investment during network upgrade

4 Mass buffer

5 Unique buffer technology ensures the excellence of your network in data transmission and multimedia application

Performance

In conformity with the following

1 IEEE802.3 10Base-T standard

2 IEEE802.3U100Base-TX/FX standard

3 IEEE802.3Xstandard

Interface transmission rate

4 Optical interface: 155Mbps

5 Electrical interface: 10/100Mbps

6 Automatic identification with cross line and through line

7 BC-100S can use either cross line or through line for connection with the devices such as switch or server.

8 TX LINK/ACT lamp “On” indicates the correct interconnected link

Duplex supportive

9 BC-100S supports full/half duplex adaptive, and 10/100M self adaptive

Network cable

1 10/100Base-TX UTP Class5

2 100Base-FX: single mode fiber8.3/125,8.7/125,9/125 or 10/125μm

Transmission range

1 10/100Base-TX:100 m

2 100Base-FX:25/40/60/80 km (single mode)

Optical interface features

1 Dual wavelength single fiber bidirectional transceiver: WDM technology is adopted.

2 The transmission/receiving wavelength of one set is 1310/1550nm, and that of the other set is 1550/1310nm. So it must be used in matched pair.

LED display

PWR: Power indicator lamp

FX LINK/ACT: Optical link connecting/ active status indicator lamp

TX LINK/ACT: Electrical link connecting/ active status indicator lamp

FX100: Optical interface rate indicator lamp

TX100: Electrical interface rate indicator lamp

FDX: Full/half duplex indicator lamp

Interface configuration

One RJ4510/100Base-TX interface

One SC/FC single mode simplex connector

Power requirement

1 Outside power supply: 5VDC 1A

2 Power consumption: <5W

3 Input voltage: 220VAC (90VAC~240VAC)

Dimensions

Outside power supply: 26mm×71mm×94mm

Inside power supply: 30mm×115mm×175mm

Environmental requirement

Operating temperature range :0°C~60°C

Storage temperature range: -40°C~85°C

Relative humidity: 5%~90%