Waste Management Scrap Copper Wire Shredders Machine

(also called used cable recycling machine/copper cable granulator/cable wire recycling separator/waste cable copper wire recycling machine etc.)

1. Introduction of Scrap Copper Wire Shredders Machine :

Our waste copper wire separator is used for recycling: Computer wire, Automobile/car wire,

Telephone wie, Communication cable, electric wire&cable etc.

It separates the PVC/plastic/rubber skin from the copper inside.

We can recycle copper and plastic at the same time!

It works in a resource-saving and environmental friendly way!

No water consumed and no air pollution during the process!

Totally changed the traditinational way of burning the wire for recycling!

2. Working Principle of Scrap Copper Wire Shredders Machine :

When directly put into the machine, used cable is cut into granules first, during this process, copper and

plastic is separated but mixed together, then the granules are sent to vibration device for separation,

through wind blow and vibration, the copper and plasticis are separated, then pure copper comes out from

one side and pure plastic comes out from the other side, we collect the separated pure copper and plastic

at last!

3. The advantages of Scrap Copper Wire Shredders Machine :

· Suits wide range of Wire/cable:

Computer wire, Automobile/car wire, Telephone wie, Communication wire&cable etc.

Single core, Double core, Multi-core etc.

We put the waste wire/cable directly in the machine! No matter twisted or tangled together!

(The diameter should between 0.5-20mm)
· High efficiency: 99% recycling rate. It can recycle copper/aluminum and plastic at the same time!
· Energy saving: It consumes less energy compared with the same products!

· Environmental friendly: no water needed and no air pollution! All the dust is collected.

· Easy operation: easy installation, devices are fixed on the bottom board, easy to move or transport!

4.Technical Parameter for Scrap Copper Wire Shredders Machine :

5.Picture of Various models Scrap Copper Wire Shredders Machine :

YF-200 Model

YF-400 Model

YF-600 Model

YF-800 Model

YF-1000 Model

YF-1500 Model

6. Product picture of Scrap Copper Wire Shredders Machine :

7. Scrap Copper Wire Shredders Machine Raw Material And Effect :

8. Scrap Copper Wire Shredders Machine Our Warranty:

All the equipment must be 100% brand new when leaving our factory. The guarantees quality of the machines for a period of one year from the date of exporting date. If any parts (excluding easily damaging parts) are found defective in quality in the first year, We will replace free one. After one year, parts can be replaced on favorable payment basis.

9. Scrap Copper Wire Shredders Machine Export Packing:

10. Scrap Copper Wire Shredders Machine Process:

11. Scrap Copper Wire Shredders Machine Certificates:

12. Scrap Copper Wire Shredders Machine Service Promise:

Before-sale services: We guide customers to choose the best applicable device type and provide the advanced, energy-saving and practical technological process, and also we are responsible for the site planning and design.

On-sale services: products must be inspected strictly before sell, customers are invited to simulate and test machine on-the-spot and raise objections. We will organize delivery according to the clauses stipulated in the contract.

After-sale services: Our Company will send professional engineers to guide installation, debugging and training operators until customers are fully satisfied. Moreover, we can design and manufacture products according to customers’ specific requirement.

13.WElcome to visit our factory and test our machine in our workshop,Pls contact Mr Smalljack for details