24V DC Ceiling Air Conditioner PIR Motion Sensor

Features:

BRT-311 combines Passive Infrared (PIR) detection technology and Infrared remote control technology to control home appliances with infrared remote control. When there is nobody in the detecting zone for the preset time, it can automatically turn off home appliance. This avoids leaving home appliance on when forgetting to turn off and saves energy. This switch is widely used in homes, meeting room, office and other public lightings place.

l Ideal for use for home appliances with infrared remote control such as air conditioners, TVs, fans, speaker box, lightings etc.

l Power saving and energy saving: When nobody in the detecting zone for the preset time, it can automatically turn off the lights. Time lag before switching off can be set from 15 minutes to 120 minutes.

l DC power supply makes it safe and reliable;

l Sensing Angle: 360 degree and no blind angle;

l Working distance from 5 to 7 meters when installed at a height of 2.4 meters;

l Installation advantage: No need to drill hole on the wall, install to the ceiling and close to the lights, no need for rewiring;

l Synchronous control: One switch can be set to control 4 different home appliances at the same time.

l Oval panel and snap-on design, easy for installation.

Specifications:

Product Picture Overview:

Wiring Diagram:

Installation:

Method one: Make a hole of 68mm diameter in the ceiling, insert the switch into the hole and the switch can be held against the ceiling.

Method two: Drill two screw holes in the ceiling and fix the housing onto the ceiling using two screws. The switch can be fit into the housing easily.