Driver Fatigue Monitor System MR688

Brief Introduction :

.Doctor R&D team’s 5 years’ effort..Worldwide patent..Advanced face recognition and patented pupil detection technology, driver fatigue can be predicted and warned immediately..Suit for all vehicles..With signal output for fleet management system..Widely welcomed by the market after launching.. Normal operating voltage 12V,24V; . Min operating voltage 8V Driver Fatigue Monitor System MR688 Components:

Driver Fatigue Monitor System MR688 Warning Principle:

.When human beings are in fatigue and distractibility, their pupil will constrict quickly before they go to sleep. .According to driver’s eyes physiology reaction under fatigue state, combining the characteristics of driver’s eyes closing time and image movements, use artificial intelligence technology to judge the accuracy and reliability by enhancing the compromise of various information. Images continuously taken
by the camera of MR688 MR688 Installation Position ( easy to install ): MR688 connect to GPS(VAL) system, efficiently manage your fleet Driver Fatigue Monitor System MR688 reduces accidents :

Saving your cost to operate a fleet.

MR688 Packing

Ask and Answer

1.Which output does the MR688 has?

The standard product’s Fatigue signal output is 3.3V, Power input is 9V-32V.

We can customized the voltage based on your connecting device.

2.How can be stored fatigue and distraction events for later analysis?

The information of judging fatigue and detect distraction are instored in the RAM of the host, you can get the information of fatigue

and distraction for later analysis by external record of alarm signal output. Alarm signal output is designed for this function.

3. How data can be sent directly via GPRS to provide real-time information to fleet management?

Now, MR688 outputs the alarm signal via the way of ON/OFF. When MR688 is alarming, the signal is ON. It can realize the real-time monitoring and analysis after GPS receives the signal and sends the information to fleet management center.

4.As for the infrared light, I wonder if it will light up at night or when the ambient light is weak or when MR688 is alarming?

Infrared light is always open while connecting power, but the power voltage is very low. The infrared light will flash when MR688 is alarming, but

generally the naked eyes can only take notice of it at night, and people need close look to find a little red during the day.

5.Which kind of infrared is it? How to prove that it is harmless for the safe of eyes,face and body ?

Infrared is a long-wave and the low power is harmless. For the bigger voltage, it also has the good effect of heating and beauty, but the ultraviolet rays is harmful.

Infrared light with low-power is completely harmless, in particular, MR688’s infrared light voltage is less than 0.2W and it is around 800mm away from the face,

what’s more, its power is lower than the natural infrared light in the cloudy day. Therefore, it is harmless, and even with a little cosmetic results.