220V+9v Battery Powered Photoelectric

GSM Smoke Alarm

System introduction:

Wireless GSM intelligent commercial/household combined with advanced GSM digital signal processing technology. Send messages and dial numbers to tell you the alarm. It is widely used in shops, offices, as well as villas, residential, neighborhood unit, garage, warehouse, etc.To protect the property and personal safety of users where the wired network can’t be reached.

Brief introduction of the function:

10 groups of telephone called, 10 set of messages calledEEPROM Information protection, Information is never lostBuilt-in backup rechargeable battery, can automatic conversion when Power cuttingAc power and dc power conversion to each other 850/900/1800/1900 MHZ GSM/GPRS wireless module Mobile phone remote control protection, removal, control, etcTest key can test whether the function is normal or not, hold down the button for 15 seconds, open the GSM alarm function.

Technical Parameter

Two Power Supplier: 9V Ni-MH battery and AC220V(187V to 240V)/50HZSmoke Sensitivity: Compatible with UL217 standardWorking Temperature: 40°F-120°F(4°C-50°C)Gas interface temperature: 10% - 90%Alarm speaker volume: 85db at 10 inchesThe standby current :< 40 maThe alarm current :< 400 ma

Model	SFL-908
Sensor	Photoelectric GSM Smoke Detector
Working Voltage	9V Nimh Battery powered +AC220V
Working Current	Static current < 10ua ,Alarm current 10 ~ 30mA
Smoke sensitivity	Complies with UL217 Standard, the test value per inch of 3.2% weak Misty detector response
Alarm Output	9VDC independent
Working Temperature	-10~50°C
Alarm volume	10-inch 85dB
Dimension	120*45mm

Picture shows:

The production line picture shows: