Kavir Lubricants Consultant

A Complete Lubricants Manufacturing, Research & Marketing Consultancy

Contact #0091- 9991721161, 9355511664

Website www.kavirlubricantsconsultant.in

The Points mentioned below are to start world Class Lubricants Manufacturing Business: Please Note the Steps

1. Sufficient Finance:

For installing 100 KL Per Month Production Plant investment required is Rupees 25 million (Rs-25000000).

2. Site Selection:

Any nearest SEZ on any National Highway or other Suitable Place.Easily availability of Raw Material (Base Oils, Additives and Packing Materials).Availability of Good Transportation Services.Availability of required Manpower.Availability of Electricity.

3. Plot Area Required For The Project:

Total Area : 1000-1500 Square Yards Minimum . Covered Area: 800 Sq. Yards. Minimum

4.Building:

Main Plant.Administrative block.Store for Empties & Filled.Pump House, Thermo Pac Room.D.G Set Room, Electrical Panel Room.Security room.Laboratory.

5. Tanks & Kettles:

Base Oil Storage Tanks: 4 Nos. of Capacity 25 KL each.Blending Kettles: 2 Nos. Of Capacity 5 KL each.Product Holding Tanks. 3 or 4 Nos. Of Capacity 5 KL each.

6. Filling Machines: For

Barrels: 210 Liters.Pails: 50, 20, 15, 10, 7.5, 6 Liters.Small Packs: 0.50 To 5 Liters.Small Packs: 0.50 To 1 Liters (dedicated).

7. Sealing & Packaging Machines : For

Capping Machine : 5Liter,1Liter & 0.50 Liter Containers.Induction Sealing Machine: 5Liter,1Liter & 0.50 Liter Containers.Carton Sealing Machines: 5Liter,1Liter & 0.50 Liter Containers.Pails Sealing Machines: 20, 15, 10, 7.5, 6 Liters.

8. Ink Jet Printing Machine: For Marking

Batch Nos.Manufacturing Dates.Code Numbers.

9. Equipments:

Air Compressor.D.G. Set.Thermopak.Induction Heating System: 3 Nos.Fork Lift: Capacity 1000 Kg.Weighing Scales : Capacity 500 Kg each, 2 Nos

10. Basic Laboratory Equipments:

Kenenfenske Routine Viscometer Baths : 2 Nos.Viscometric Tubes: 6 Nos.Reverse Viscometric Tubes.Cleveland Open Cup Flash Point Tester: 1 No.Muffle Furnace.Conrad Son Carbon Residue Tester (Bomb Method).Electronic Weighing Scale.Automatic TBN Titrator.Color Comparator Box.Demulsibility Tester.Hydro Meter.Pour Point Bath.

11. Licenses & Legalities:

Manufacturing License.Tin Number.Central Excise Registration.Fire NOC.

12. Raw Materials:

Base Oils.Chemical AdditivesCorrugated Boxes.Empty Containers.

13. Types of Additives:

Detergent.Dispersant.Viscosity Index Improver.Total Base Number Improver.Defoamer.Oxidation Inhibitor.Demulsifier.Thermal Stabilizer.Pour Point Depressant.Rust & Wear Inhibito

14. Lube Oil Production:

Base Oil Charging to the Blending Kettle, as per the Standard & Approved Formulations.Maintain Optimum Temperature of the Base Oils for a Recommended Time Period.Additives Charging to the Blending Kettle, as per the Standard & Approved Formulations.Blending for a recommended time to get homogeneous mixture.

15 Grease Production:

Fat and Alkali Charging to the Blending Kettle, as per the Standard & Approved Formulations.Base Oil Charging to the Blending Kettle, as per the Standard & Approved Formulations.Maintain Optimum Temperature of the Kettle for a Recommended Time Period with continuous Stirring.Then follow the Instructions Carefully

16. Finished Oil Testing:

Specific Gravity at 29.5 C.Viscosity at 40 C.Viscosity at 100 C.Viscosity index.Flash Point.Pour Point.TAN.TBN.CCS.BPT.Shear Stability.Color.ICPAES.Engine Test.4 Ball EP Weld Load Test.Air Release Value.Demulsibility.Die-electric Strength.

With Thanks & Regards

Kavir Lubricants Consultant Team.