Original MEANWELL 100W SE-100-24 Single Output Switching Power Supply

Location:

hangzhou China (, Mainland)

Status:

New

Sample Availibility:

yes

Payment Terms:

Cash, Bank Transfer, Letter of Credit, T/T, L/C

Categories:

Home > Electronics & Electrical > Power Supplies

Product Description

Introduction:

After the launch of SE family (200W/350W/450W/600W/1000W/1500W), MEAN WELL further introduced the new 100W economical enclosed type power supplies~SE-100 series. Featuring with 115VAC or 230VAC input selectable by switch, SE-100 provides 5V~48V of single output voltage for selection. Compared to the NES-100 series of NE family, SE-100 series have exactly the same electrical specifications and mechanical dimensions. But the difference is that SE-100 series are produced under lead-free process, so that they can meet the requirements of new CE/RoHS standard and fulfill the customers who originally purchased NES-100 series but request CE certificate.
SE-100 series possess up to 86% of efficiency and can be cooled by free air convection from -20°C to +60°C ambient temperature. The standard protection functions include short circuit, overload, and over voltage. In addition, these new series comply with certificates per UL/CUL/CCC/CB/CE regulations which can greatly guarantee your safety. Suitable applications include industrial control system, factory automation, electro-mechanical applications, and electronic equipments.

Feature

ü 1U low profile:38mm

ü High efficiency up to 86%

ü 85~132VAC or 176~264VAC input selectable by switch

ü Protection: Short circuit / Overload / Over voltage

ü Cooling by free air convection

ü LED indicator for power on

ü 100% full load burn-in test

ü Certificates:UL / CUL / CCC / CB / CE

ü Dimension(LxWxH):159x 97x 38mm

ü 2 years warranty

MODEL		SE-100-24
OUTPUT	DC VOLTAGE	24V
	RATED CURRENT	4.5A
	CURRENT RANGE	0~4.5A
	RATED POWER	108W
	RIPPLE & NOISE(max).Note.2	120mVp-p
	VOLTAGE ADJ.RANGE	22.8~26.4V
	VOLTAGE TOLERANCE Note.3	±1.0%
	LINE REGULATION Note.4	±0.5%
	LOAD REGULATION Note.5	±0.5%
	SETUP,RISE TIME	500ms,20ms/230VAC 500ms,20ms/115VAC at full load
	HOLD UP TIME(Typ.)	30ms/230VAC 25ms/115VAC at full load
INPUT	VOLTAGE RANGE	85~132VAC/ 176~364VAC selected by switch 248~373VDC
	FREQUENCY RANGE	47~63HZ
	EFFICIENCY(Typ.)	86%
	AC CURRENT(Typ.)	2A/115VAC 1.2A/230VAC
	INRUSH CURRENT(Typ.)	COLD START 36A
	LEAKAGE CURENT	<2mA/240VAC
PROTECTION	OVERLOAD	110~150% rated output power
	OVERLOAD	Protection type: C an be con tinued, recovers automatically after fault condition is removed
	OVER VOLTAGE	27.6~32.4V
	OVER VOLTAGE	Protection type : Shut down, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20~+60°C (Refer to "Derating Curve")
	WORKING HUMIDITY	20~90% RH non-condensing
	STORAGE TEMP HUMIDITY	-40~+85°C 10~95%RH
	TEMPCOEFFICIENT	±0.03% /°C(0~50 °C )
	VIBRATION	10~500HZ,2G10min/1cycle,60min.each alongX,Y,Zaxes
SAFETY & EMC(Note 7)	SAFETY STANDARDS	UL60950-1, CB(IE60950-1),CCC GB4943.1:2011 approved
	WITHSTAND VOLTAGE	l/P-o/P:3KVAC; l/P-FG:2KVAC; O/P-FG:0.5KVAC
	ISOLATIONRESISTANCE	I/P-O/P, I/P-FG, O/P-FG :100M Ohms / 500VDC / 25°C/ 70% RH
	EMC EMISSION	Compliance to EN55015, FCC part 15 class B
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A
OTHERS	MTBF	320.7Khrs min MIL-HDBK-217F(25°C)
	DIMENSION	1599738mm(LWH)
	PACKING	0.55Kg; 30pcs/17.5Kg/0.97CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance : includes set up tolerance, line regulation and load regulation. 4.Constant current operation region is within 60% ~100% rated output voltage, and the output power must be more than 60% rated output power.This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5.Derating may be needed under low input voltages. Please check the static characteristics for more details. 6.Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 7.The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

Why Choose Us ???

Original MEANWELL brand

1. We sell 100% original real MEANWELL brand, and have the certificate of UL, CUL, CE, CB, RoHS etc.

2.The different S/N code on surface of the products, can check the code with MEANWELL company.

Competitive Price +A Fast Delivery + Satisfied Customer Service

1.Our goal is to provide you the right product and make you satisfied, so please don’t hesitate to contact us via Tel or mail.

2. We shall find for you the cheapest shipping term and show you the freight and shipping time. Regarding to the urgent order, a quickest shipping term and freight will be advised to you for consideration.

3.The stock info will be informed before your order, to make everything under control.

4.We will quote to you competitive prices according to your quantities.

5.Price could be negotiated for more and large quantity.

6.We have a technical team, if you show us your LED information, we can find right drivers for you to match LED.

Shipping & Duties

Usually, shipping will be arranged within 2-3 Days upon payment or deposit, from Monday to Saturday only.

Payment

To assure you the maximum comfort and satisfaction, Currently, you can pay via T/T, L/C, WESTERN UNION, PAYPAL, More payment options will be added in the near future.

After-sale service

All of the products we sell are with a certain time warranty.

during the warranty, anything wrong with it, like no working an unstable output voltage or current, damaged, my corporation will be responsible to fix it well for free and re-send it to the clients, But, the delivery cost should be paid by purchaser himself.

We will be very glad to provide the assistance during your installation and application at any time.

Your inquiry and mail will be quickly responded. Suppose you have no ideas on choosing the right power supply, please do not hesitate to contact us.

We will always be here and try our best to provide you our best service !

Waiting for your kind inquiry !

This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here