brand new bluetooth security alarm for iphone ipad ipod

About VTag

Vtag device is triggered through the Smart blue iOS app and Bluetooth 4.0 technology.

When you can’t seem to find your keys, tap the “Find” button in the app. If VTag device is within a preset range, it will signal its position by beeping.

If you’re not within range, you can walk around with the app open and the on-screen proximity display will sync with the device’s built in sensor.

If you hold two buttons at same time,the VTtag will make iPhone as or new iPad sound alarm or vibrating on table, to give alert to keychain owner.

Vtag can also be placed inside Car, your iPhone 4S or new iPad will record GPS data of your parking place, and will help you quickly find the way to your car.

Because of Bluetooth’s low power feature, the VTag can go up to six months before you replace the CR2032 battery with a new one.

Instruction manual:

SETUP:

Sep1

Please search and down load Blue Smart at iTunes App Store .

Step2

Touch "Settings" them "General" on your iPhone's screen. Touch "Bluetooth" then touch "Turn Bluetooth on", and open Blue Smart app in iPhone 4S/5 or new iPad.

Step3

Press Connect Button 3 seconds to pair the VTag device with iPhone or iPad. The Blue Smart app will discover VTag. please tap "Pair" to permit the VTag connection.

STATUS

Paring

1. Long press Connect button in disconnected or closed status.

2. 2 beeps to entering pairing and fast green light flashing with 0.5s interval, and last 6os.

Disconnected

1. Out of range or control in Blue Smart APP to Disconnect.

2. Beeps for 5s and slow continuous green-light flashing with 5s interval.

Paired

1. Connected and Paired.

2. A fast green flashing for 2s to enter connected status, then no light.

Closed

1. "Close VTag" from control bar in Blue Smart App in paired status.

Alert:

In/Out of Range Alert

1. If the distance of the Paired VTag and iPhone/iPad is out of range, both VTag and iPhone/iPad will trigger alert. "Setting mode" in Blue Smart APP will define the type of alert.

2. Pre-paired VTag and iPhone/iPad will trigger alert if re-connected.

Trigger Find my VTag Alert

1. Tap "find me" in blue Smart APP in paired status.

2. Immediate alert VTag with predefined beep or Red LED light.

3. Tap "Mute" in Blue Smart APP in paired Status, it will Mute VTag Alert.

4. Tag Connect button can also mute the alert in VTag.

Trigger Find my iPhone/iPad alert

1.Mild Alert: Short Push Connect and Function button together in paired status. It will trigger mild Alert in iPhone/iPad

2. High Alert: Long push(3s) Connect and functionbuttontogether in paired status, it will trigger high alert in iPhone/iPad.