solar water heaters

Makes your life more environmental, energy-saving and comfortable!

Wall mounted,Integrated and split types.

Pressurized and non-pressurized are provided.

Parameter of Tank(100L)

1.Diameter of inner tank:365mm

2.Diameter of outer Shell:470mm

3.Material of inner tank:SUS304/316 stainless steel

4.Thickness of inner tank:1.2mm,Outer shell thickness:05mm

5.Material of outer shell: galvanized plate or stainless steel

6.Insulation material:High dense polyurethane foam

7.Insulation thickness:50mm

8.Installation size of water pipe:NPT3/4"

9.Rated heating power:1.5kw

10.Surface area heat exchanger top:0.6

11.Lower coil:14*1.0*12mm ao

12.Working pressure:0.6Mpa

13.Test pressure:1.2Mpa

14.Overall size: Φ 470*1180

15.Weight:32KGS

Various Styles
1.80L,100L,120L,130L,150L,160L,200L,250L,300L,400L,500L,800L,1T,2T,5T and 10T tanks capacity are optional.
2.Integrated,split and wall mounted types.
3.Pressurized and non-pressurized are provided.

Six Protections
1.Rust protection:stainless steel tank is antirust, anticorrosion,high pressure resistant and anti-fatigue.
2.Dry burning-resistant protection:even water-break, the protect value will protect the heating rod and prolong life-span.
3.Overpressure protection:when the water pressure is over 8KG/cm2, the safety valve will reduce pressure automatically.
4.Overtemperature protection:the temperature controller imported from France can heat or cut off the power automatically.
5.Leakage protection:when electric leakage reaches 0.01A, the leakage protection switch will cut off the power automatically within 0.1 second.
6.The heat protective material(without freon) can reduce the heat loss.

Advantages and Features
1.Single coil tube or two coil tubes are optional for the tank.
2.Overall polyurethane foam,high density and high insulation.
3.The heating coil tube at the bottom of the tank can heat the water equally to meet the daily use.
4.Innovative patented of built-in hidden forced circulation system,promote the system of heating exchange efficiency.
5.The high quality magnesiarods can soften water and lengthen the service life of inner vessel. In addition, it can decompose the scale and safeguard your skin.

Evacuated Tube Solar Collector (Aluminum Type and Stainless Steel 304-2B Type)
1.The solar collector is consisted of super conducting vacuum heat collecting tube and header, so it's of great efficiency of heat collecting.
2.The absorbing percentage of the glass vacuum collector is more than 94%. In the sunny days of spring or autumn, each collecting tube could make the water up to 90 degrees centigrade only in 2.5 hours.
3.Heater tube: seamless Copper-YU1 x thickness: δ1.2mm, diameter: Φ22mm; outer manifold: thickness: δ2.0mm; bracket: Aluminium alloy x δ1.6mm.
4.Insulation: mineral wool x thicknessδ40~50mm; Copper heat pipe thickness: 0.6mm.