Laser smoke purifier

Working laser processing equipment , will produce a large number of soot, in particular processed material is leather , PVC raw material, exhaust fumes is smelly , seriously affecting the work environment, and will bring pollution complaints .

The purification machine series is designed for laser processing equipment, engraving , marking, cutting , welding, etc.exhaust gas.

Application Scope: laser marking, engraving, cutting , welding and medical treatment laser , chemical experiment soot purification treatment.

Product Features

1. body integration design, easy installation, with casters, easy to move, without laying pipes;

2. Soft start, brushless fan, high pressure high speed, high efficiency, low noise, long life;

3. PWM speed control , filter layer pressure differential automatically detects feedback intelligent control system, when filter layer clogged will give audible and visual alarm signal

4. ·for odor produced in laser processing, fine filter, multi-layer filter design, grading purification, efficient purification of smoke, odor removal, meet indoor emission standards, protect the environment and human health.

5. Modular design filters, layers protection, easy to replace, long life;

6. · indoor recirculating air filtration to avoid indoor cool air (or heating air ) go out, and can maintain the cleanliness of indoor air, save energy and reduce costs.

1 purification machine Function: This machine is designed for the purification of laser marking , engraving , cutting, welding fumes

SRA-500XL laser smoke purifier machine adopts imported high pressure, low noise fan , which can effectively absorb soot particles and maximum extend the life of the filter .

The control system uses a PWM speed control, give continuous precise regulation to air flow according to the amount of dust generated ;

design of the control system have indicator light alarm device, when the filter clogging , the red LED is lit, remind to replace the filter . The purifier filtration system is made up of pre- filter, main filter layer and a gas filter layer , pre-filtration layer can absorb relatively large particles in the gas stream to prevent premature main filter layer is blocked ; the main filter layer is formed of a HEPA filter , HEPA high efficiency filter cartridge for 0.3 micron particle filtration efficiency is 99.99% , the gas filter layer composed by a chemical filter , can effectively remove the harmful gas stream .

4 the outside interface:

1 ,before connecting the power , voltage and frequency required to confirm whether the device using the rated voltage and frequency to match.

2 , hose connection to the device requires proper sealing , the hose shall not affect the air flow through .

5 , filter replacement instructions : When the filter used for a period of time, regardless of need to be replaced or moved , shall wear protective gloves and masks . the machine control alarm, prompt us to promptly replace the filter . 1 , the replacement of pre-filtration layer : wear gloves and protective masks → → Open chassis door lock with a hex wrench to loosen the lever Luo →Remove the pre-filter → into a plastic bag and seal → replaced with a new pre-filter→ Close the door . Note : The old pre- filter element can be cleaned by blowing short-term repeated used

2, the replacement of the main filter layer :wear gloves and protective masks →Open chassis door lock with a hex wrench to loosen the lever Luo → Remove the main filter → into a plastic bag and seal → put on the new primary filter → Close the door .

3 , replace the gas filter layer :wear gloves and protective masks → Open cabinet doors → Use a hex wrench to loosen the lock lever Luo →Remove the gas filter → into a plastic bag and seal → Replace with new gas inside for filters Luo hex wrench locking lever to compress the seal of each filter in the state , shut the door , replace the filter is completed, the machine can be turned on to work properly.

6 , the practical application diagram: