About Galleon Systems

Galleon Systems have been providing time synchronisation and atomic clock related products for nearly two decades, becoming specialists in the synchronisation of computer networks and technology.

Galleon's wide range of time synchronisation products include dedicated Network Time Protocol servers (NTP servers) that can synchronise entire networks, and simple atomic clock receivers that connect to a single PC.

Galleon Sytems NTP Time Servers and Network Clocks and Displays and are used by organisations across the globe and provide reliable synchronised time 24 hours a day 365 days a year!

Product Type

1. NTP Servers

2. Network Clocks & Displays

3. Network Time Servers

4. Time Receivers

5. NTP Client Software

6. Antennas

7. Modules

8. Accessories

NTS-4000-S NTP Server

True Stratum 1 NTP Time ServerGPS time reference inputWeb based configuration interfaceHandles >3,000 NTP requests per minuteSolid State memory eliminates 'disk failure'Syslog error reportingIndustry leading 6 year warrantyFree product lifetime support

NTP server NTS-4000-S

A standalone version of the NTS-4000-R rackmount units. The NTS-4000-S is an entry level dedicated NTP server for TCP/IP networks, built using Galleon Systems proprietry operating system, provides a complete solution for synchronising the time across computer networks.

The NTS-4000-S Time Server series combines either an MSF (radio) or GPS receiver with an embedded solid state controller and is configured and managed via a network interface.

The IP address of the unit can be configured automatically using DHCP to assigning an IP address or a fixed IP address can be used. A display on the front of the unit shows run-time information for both the signal reception and time output.

The NTS-4000 series can handle more than 3,000 NTP requests per minute, making it the choice for providing accurate time information across your network.

Key Benefits

Ready-to-operate Stratum 1 NTP Time ServerSupport for NTP and SNTP compatible clientsHandles > 3,000 ntp requests per minuteSolid state, upgradeable flash memory - no moving parts!Front Panel display for easy Time and Signal StatusSyslog error reportingSecure proprietary operating system for enhanced security6 years warranty

Product codes for the GPS and MSF* versions of the NTS-4000-S NTP server

GPS receiverMSF (radio) receiver

Product code: NTS-4000-S-GPS

Product code: NTS-4000-S-MSF

Key Features

Product Specification for the NTS-4000-S-GPS time server
Receiver:	Active 12 channel GPS Antenna
Timing Accuracy:	Network: ± 12 milliseconds, typical
	GPS: <1 microseconds, relative to UTC
NTP Time Requests:	>3,000 requests per minute
Supported Networks:	Can supply time to a single network
Power Consumption:	8 Watts
Dimensions (H × W × D):	45mm × 423mm × 163mm
Display:	LC-display, 2 x 20 characters, with backlight
Operating System:	Proprietry
Protocols (NTP & SNTP):	NTP: v2 (RFC 1119), v3 (RFC1305), v4 (RFC 2131)
	SNTP: v3 (RFC 1769), v4 (RFC 2030)
Network Interface:	Single RJ-45 Network Connection 10/100 MBit
Power supply:	85 - 260V, 47 - 63Hz
Operating Temperature:	0-50°C / 32-122°F
Operating Humidity:	Max. 85%

What's in the box

NTS-4000-S UnitGPS Mushroom Antenna or MSF radio antennaInstruction ManualPower LeadNTP Software CDJunction Box (used to extend antenna cable - if necessary)IDC Cable Tool (used to insert cable into the junction box- if necessary)

Additional Extras

The following products are also available for use with the NTS-4000-S NTP Time Server:

Gold and Premium Support PackagesDigital Wall ClocksAntenna Cable (100 to 1,000 metre rolls available)Additional Antenna Power Supply (Recommended from 150 metres onwards)Lightning ArrestorAdditional Software Licenses (available from 5 to 300+ clients)

Other Hot Selling Products