Three Phase Motor

Range

0.10 H.P. to 75 H.P. (0.075 K.W. to 55 K.W.) Frame 63 to 250M in 2, 4, 6, 8, 10 & 12 Pole

Mounting

- Foot - Flange - Face

Standards

Performance conforms to be: 325 and dimensions according to IS 1231 & IS 2223

Frame

Motor are supplied in a robust, rugged cast iron frame with integral feet. On Request we can supply motor in aluminum body up to 100 L frame.

Ratings

All Standard Three phase Motors are continuous rated to comply with performance standards.

Voltage and Frequency

Supply volts 415 +- 5% 3 phase 50 Hz. +- 3% (on customer request we are also able supply motor in 220, 380, 460, 525 volts on HZ. 50 or 60 Also)

Enclosures

Motor IP-44 Protection as defined in IS: 4691. Motors can be supplied with IP-54 and IP-55 on request.

Insulation

Motor supply with class B & F insulation as standard feature. Also supply H on request of customer.

Shaft

Made from high carbon steel to provide exceptional Strength & rigidity to minimize deflection.

Rotor

Rotors are of high-pressure E.C. Grad aluminum die-cast. Every rotor is dynamically balanced. Its make motor low amplitudes of Vibration & noise

Bearings & Lubrication

Bearings are adequately lubricated with lithium based high temp up to 150 deg. All the motors are supplied with C3 ball bearing & fully charged with lithium base grease at the time of assembly.

Earthling terminals

Motor provided with minimum two earthling terminals. One in the terminal box and other on foot.

Paints

All standard motor are painted with semi glossy synthetic enamel paint. However sp. Paint is available on request.