Livingh2o 5 gallon water dispenser

About the Product

*Cooling Type: Electrical

Hot Water Temperature: 85°C-99°C

Cold Water Temperature: 10°C-15°C

Mold: Plastic injection

1. Product Specifications

Item Number		B27A
Product Description		Electric Cooling Water Dispenser
FUNCTION:		Hot & Cold Water
Packing(cm): L*W*H		31*30*86
N.W/G.W		4.76KG/5.56KG
Voltage		220V/110V
Frequency		50-60Hz
Hot Water Temperature		85°C-95°C
Cold Water Temperature		10°C-15°C
Heating Power		420W
Cold Power		65W
Heating Ability		6L/H
Cold Ability		0.8L/H
Load Ability for 20'		330
Load Ability for 40HQ		798

2. Functionality Introduction

This product adopts international advanced technology, the latest development of a new generation of drinking fountains, beautiful shape, luxurious and elegant appearance, low noise, power saving, long service life, safety and hygiene and so on. This product adopts heating and auto temperature control system, works at high thermal efficiency.This product is capable of serving hot & cold water all day long, which could be used for tea, instant coffee and other needs for families. It can be used in a variety of public places. This product has thermal isolation technology to eliminate the phenomenon of string temperature.This stainless steel liner products, hygienic and durable. Classic model,best selling,most popularIt adopts the international advanced technology of compressor cooling, high cooling speed,below 10 °C in half a hour, and high efficiency, cold water outlet in large,can supply 50 people within half a hour.

3. Packing:

Packing: 1 piece/carton

Carton Type: 5-layer Enforced A=B

Plug Overview: (All for optional)

Assessory Overview:

Country Overview (our existing customers):

User Manual:

Steps:

1. Tear off the sticker on the bottle cover.

2. Put the bottle vertically into the smart seat on the top of machine, then open the red faucet and water will flow out.

3. Put the plug into the socket and switch on. The water dispenser starts to run and the indicator light turns on.

4. Please pull out the bottle while water is used up and put a new one.

Detailed and actual specifications are subject to physical sticker attached on the water dispenser. There is no particular announcement made.

Installation Chart of Fixing Plate:

In case of un-flat ground or surface and inclination degree is 15, an fixing plate shall

be used to fix the water dispenser to avoid falling over. Following are steps to follow:

1. Install the fix piece and fasten the screws

2. Punch two holes into ground, insert the bolts into the holes, and fix the fix piece on bolt accordingly.

Customizations:

1. Logo

2. Carton Layout Wording

3. Other requirements can be discussed in greater details

BEST PRICE, HIGH QUALITY, GOOD SERVICE!!

TIME IS MONEY IN THIS BUSINESS, SO LET'S GET RIGHT TO IT.

CONTACT ME RIGHT NOW!