Product Name: agricultural adjuvants pesticide adjuvants silicone surfactant Specifications

1.Agricultural surfactant slicone surfactant
2.ISO14001:2004,ISO9004:2008,Intertek,SGS
3. Low dosage, good quality

[Instruction]

Agricultural Silicone Synergistic Agent RH-208 (silicone surfactant, pesticide surfactant, fertilizer surfactant) is a modified Trisiloxane, and is an organic silicone surfactant with super ability of spreading. It makes the water surface tension lower down to the 20.5mN/m at the concentration of 0.1%(wt.). After the mixture with the pesticide solution at the certain proportion, it can lower the contact angel between the spray and foliage, which can enlarge the coverage of the spray. Furthermore, Runhe*208 Agricultural Silicone Spreading and Penetrating Agent can make the pesticide absorbed through the stomatal of leaves, which is extremely effective for improving efficacy, reducing amount of pesticide, saving cost, reducing environmental pollution caused by pesticides.

Agricultural Silicone Synergistic Agent RH-208 has super spreading and penetrating property, high-efficient systemic and conduction property, and tolerance property of rainfall.

[Basic Character]

Appearance:	Colourless to light amber liquid
Surface Tension(0.1%):	<20.5mN/m
Density:	1.01-1.03g/cm3
Viscosity(25°C):	40-60 mPa.s
Cloud Point:	<10°C

[Use Method]

1) Used of spray mixed in drum

In general, add Agricultural Silicone Synergistic Agent RH-208(4000times) 5g in every 20kg spray. If it needs to promote the adsorption of systemic pesticide, increase the function of pesticide or reduce the amount of spray further, it should add the usage amount properly. In general, the amount is as follows:

Plant promote regulator: 0.025%-0.05%

Herbicide: 0.025%-0.15%

Pesticide: 0.025%-0.1%

Bactericide: 0.015%-0.05%

Fertilizer and trace element: 0.015%-0.1%

When using, first dissolve the pesticide, add RH-208 after the uniform mixture of 80% water, then add water to 100% and mix them uniformly. It is advised that when using Agricultural Silicone Spreading and Penetrating Agent, the water amount reduced to 1/2 of the normal (suggested) or 2/3, average pesticide usage reduced to 70-80% of the normal. Using the small aperture nozzle will quicken the spray speed.

2) Used of Original Pesticide

When the product added to the original pesticide, we suggest the amount is 0.5%-8% of the original pesticide. Adjust the PH value of the pesticide prescription to 6-8. The user should adjust the amount of Agricultural Silicone Spreading and Penetrating Agent according to different kinds of pesticide and prescription to reach the most effective and most economical result. Do compatibility tests and stepwise tests before usage.

[Package]

200Kg, 50Kg, or 25Kg/Plastic barrel