Jp Electronic Measuring Instrument , Measuring unit Electric Measuring System JP-380 :

JP-380 Electrical Measuring unit is a Micro-computer Electric Measuring Instrumentation newly developed by ourselves with piezoelectric transducer as electromechanical sensor,The measuring unit can show rotating speed,measured value,and phase position intuitively with options of six support models available while the piezoelectrical sensor possesses a large capacity of output,small volume and high stability

Function Introduction

Digital Display of measured value and angle,direct and easy to readIntel 8051 chip,safe reliable and fastImported components with lower failure rateMulti-methods of compensationAuto lock of rotating speed

Advantages

Coming with Intel 8051Microcontroller Unit, The main machine system is highly stable and anti-jammingDigital-tube display,Direct and easy to readThe High-quality main components are imported from the America and JapanThe data collecting system employs automatic programmed amplifier and high-performance filter with the dynamic measuring range being more than 80DB

Electric Measuring System JP-580B:

JP-580B Electrical Measuring unit is a system of top function and precision. It can be applied in all kinds of single/double plate and hard/soft bearing machines, and can be connected with different velocity and pressure sensors easily. The unit adopts industrial computer mainboard which equiped with 15-inch LCD screen ,1G memory ,Electric board 4 G Windows XP Operating System. Featuring with high running speed and reliabilitystrong dustproof and shakeproof ability, it is applicable to various industrial environments.

Features

LCD of 15inchesWindows XP Operating SystemChinese or English DisplayStorage for 1000 sorts of rotor parameter and 10000 items of measuring recordsSophisticated balancing softwareMulti-methods of algorithms10-stage calibration offers higher precisionMulti-methods of CompensationAuxiliary display for drilling and cutting

Technological Date:

Scope of RPM: 120-5000 r/minMinimum resolution: 0.01mgShortest measuring time: 3sMeasurable dynamic range:1:100000

features of products:

Various Measuring Methods: dynamic balancing, static balancing or both, ten support
modes, adding or reducing weight and CW or CCW rotating can be customized flexibly.High Precision: multi-Calibration coefficient combination, automatically adjust the
system sensitivity, no shift-skip,dual wave filtration by both hard and soft-ware,highspeed
data compression, faster,more stable and accurate measurement.DIY unit:Balance unit displayed, angle unit and precision displayed can be defined by
user.A real-time unit conversion is available to meet different requirement.Complete compensation,flat key compensation,fixture compensation,up to 9 times of
dislocation of fixtures.Technological algorithm:Indexing Algorithm,Drilling Algorithm, Milling Algorithm and
Crankshaft Algorithm.Consummate Calibration Process:Specialized Calibration interface is provides more
convenience for maintenance.Up to 10 Calibration segments.Real-time verification of
Calibration with linear chart.Sensor disconnection alarm:Automatic diagnosis of sensor disconnection, Prompt
evading of false balance.Bilingual:Optional language of English or Chinese for display and report form printing.Convenient Operation:Numeric and vector-combined display of measured values.Hint
for all the definings of parameter and the setup of domain.Large storage of data:Database storage.Limitless storage of Rotor data, jig data and
10000 pieces of measured loop records.History:Auto record of history,Optional methods of recording.Good commonness of data:Database files can be opened in MS Office.Operations like“Find”, ”Stats”, ”Filter”, ”Classify” and ”Leadout” are available via the ancillary software.Multi-report Form of Measurement:Measurement report-form, Balance Report-form,
Single-plane Measurement Report-form, etc. Note information for motor data can be
added anytime and displayed in report-form.

Optional Configuration

General management of multi-balancer: Able to establish a monitor-center for
synchronous monitoring work process of more than one balancer and effective
manipulation of the dataCursor Guides the Angle:The cursor can show the phase position of the rotor in the
extra-added module,which can help user to find the unbalance point

Electric Measuring System JP-580

JP-580 Electrical Measuring unit is a system of top function and precision. It can be applied in all kinds of single/double plate and hard/soft bearing balancing machines, and can be connected with different velocity and pressure sensors easily. The unit adopts industrial computer made in Yanhua Industry Co, which equiped with 17-inch LCD screen and Windows XP Operating System. Featuring with high running speed and reliabilitystrong dustproof and shakeproof ability, it is applicable to various industrial environments.

Features

LCD of 17 inchesWindows XP Operating SystemChinese or English DisplayStorage for 1000 sorts of rotor parameter and 10000 items of measuring recordsSophisticated balancing softwareMulti-methods of algorithms10-stage calibration offers higher precisionMulti-methods of CompensationAuxiliary display for drilling and cutting

Technological Date:

Scope of RPM: 120-5000 r/minMinimum resolution: 0.01mgShortest measuring time: 3sMeasurable dynamic range:1:100000

features of products:

Various Measuring Methods: dynamic balancing, static balancing or both, ten support
modes, adding or reducing weight and CW or CCW rotating can be customized flexibly.High Precision: multi-Calibration coefficient combination, automatically adjust the
system sensitivity, no shift-skip,dual wave filtration by both hard and soft-ware,highspeed
data compression, faster,more stable and accurate measurement.DIY unit:Balance unit displayed, angle unit and precision displayed can be defined by
user.A real-time unit conversion is available to meet different requirement.Complete compensation,flat key compensation,fixture compensation,up to 9 times of
dislocation of fixtures.Technological algorithm:Indexing Algorithm,Drilling Algorithm, Milling Algorithm and
Crankshaft Algorithm.Consummate Calibration Process:Specialized Calibration interface is provides more
convenience for maintenance.Up to 10 Calibration segments.Real-time verification of
Calibration with linear chart.Sensor disconnection alarm:Automatic diagnosis of sensor disconnection, Prompt
evading of false balance.Bilingual:Optional language of English or Chinese for display and report form printing.Convenient Operation:Numeric and vector-combined display of measured values.Hint
for all the definings of parameter and the setup of domain.Large storage of data:Database storage.Limitless storage of Rotor data, jig data and
10000 pieces of measured loop records.History:Auto record of history,Optional methods of recording.Good commonness of data:Database files can be opened in MS Office.Operations like“Find”, ”Stats”, ”Filter”, ”Classify” and ”Leadout” are available via the ancillary software.Multi-report Form of Measurement:Measurement report-form, Balance Report-form,
Single-plane Measurement Report-form, etc. Note information for motor data can be
added anytime and displayed in report-form.

Optional Configuration

General management of multi-balancer: Able to establish a monitor-center for
synchronous monitoring work process of more than one balancer and effective
manipulation of the dataCursor Guides the Angle:The cursor can show the phase position of the rotor in the
extra-added module,which can help user to find the unbalance point

Factory Outlook

Certificates

Material inspection

Production Process-Measuring system

easuring system

Production Process-Mechanical parts

Workshop debugging

Delivery inspection

Package and transport