PRODUCT INFORMATION

High Brightness

Emitted Color: Red, Yellow, White( 3000~9000k), Blue, Green, Purple

DC 12V for CAR/MOTORCYCLE/SCOOTER TURN, POSITION, PLATE, DASHBOARD LIGHT( Depends on different vehicle parts)

Long life span

Plug and work directly

Base : Ba9s & BAu9s

Base Material is made by Black cover called" Bakelite"( phenolic molding ), which is usually used to produce some heat resistance property such as ashtray.

Endurance Voltage Range: 10~18V

LED current regulator added (Ask us what it is if you dont know!) MOST SIMILAR ITEMS NOT ADDED WITH LOW QUALITY AND PRICE

LED Type: 5050 SMD 3 chips in one LED (Ask us what it is if you dont know!)Most sellers don't even understand!

Nos. of LED: 13PCS(Ttl.39 chips) TOP: 1PCS; SIDE: 3PCS X 4 Sticks

24V for TRUCK use is also available

NOTICE IN AUTO LED BULB :

DASH BOARD ERROR MESSAGE--

Please be advice that many modern luxury cars which computer built in such as Mercedes Benz, BMW,. etc., have sensors built into the dashboard computer system that can detect if light bulb works. However the purpose to use LED BULB is energy saving, which means the car computer will misjudge the LED BULB not work because of the low wattage to lead the error signal showed in your dashboard. Basically the bulb can be judged OK when the wattage goes up to 5 Watt and above, all LED BULBs themselves have nothing to do with this problem except you install resistor to enlarge the wattage

FLASH SPEED FOR SIGNAL/TURN LIGHT APPLICATION--

Normally when you flip your turn signal switch, the light blinks at a set, slow pace. However, if you have modified your lights to use LEDs, you'll notice that the turn signals now blink very quickly. This is caused by the low resistance of the LEDs due to the fact that they use less energy. To correct the problem, you'll need to wire the turn signals in a parallel circuit. To do this, you'll be installing a resistor or control flasher.

Demo & Installed Pictures: