1. Introduction of Hammer Finish Additive

It is suitable for Polyurethane,amino,acrylic and alkyd series, the resin required viscosity is bigger and the solid content is 5% higher ( using fast drying solvent depends on temperature adjustment). After matching the color, add the product 0.3-0.8% at a low speed (500rotate/minute) and mix well, test spray template, the pattern size can be adjusted by additives.

2. Attention

(1) Reference to paint’s fire protection, storage and transportation;

(2) Using special tools or cleaning completely as the additive pollutes other products;

(3) After storage for some period, the effect of the additive may become lower and the pattern may turn big or

uneven. Just add some additive again and the above problem will be resolved;

(4) LD-82 and LD-80 can not used together and substituted each other.

3. Acrylic, Polyurethane and Hammer Finish Formulation: % (only for reference)