Product description:

Polyacrylamide referred to as PAM, also known as on the 3rd cohesion agent, formula CONH2 [CH2-ch] n, is a linear water-soluble polymers, the molecular weight between 300-1800 million,

Appearance is white or colorless powder viscous gel-like, odorless, neutral, soluble in water, when the temperature exceeds 120 easy to decompose.It fully in line with ISO 9001:2000,mainly used in chemical industry,widely used for oilfield as flocculation etc.

Features of anionic polyacrylamide powder :

Product advantages:

1). Flocculation ability, high adsorption activity, floc formation and deposition of fast.
2). Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation
3). Easily to use and good effective.

4). Best quality & reasonable price.

Application areas:

1)Sludge Dewatering: As a flocculating agent, mainly used in industrial solid-liquid separation process, including settlement, to clarify, concentrate and sludge dewatering processes, applications for all the major sectors are: urban sewage treatment, paper, food processing, petrochemical, metallurgical, processing, dyeing and the sugar and all kinds of industrial wastewater treatment.

The product has special good effect to suspended matter in organic colloidal state and can accelerate dehydration and filtration of sludge rapidly. The relevant type can be chose based on the character of sludge, and the product will not stick to filter cloth during dehydration and will not loosen when filter pressing with a high efficiency.

2)Treatment of Sewage Water and Organic Waste Water:
The product shows electropositivity in acid or alkaline media, thereby the product is extremely effective for flocculation, sedimentation and disambiguition of sewage water whose suspended particulates are provided with negative charge such as waste water of alcohol plant, waste water of brewhouse, waste water gourmet powder factory, waste water of sugar making plant, waste water of manufactured meat plant, waste water of beverage factory, waste water of textile and printing & dyeing mill, dyeing wastewater, leather wastewater, oily wastewater treatment, and the like. The effect of using cationic-polyacrylamide is several times or dozens of times better than using anionic-polyacrylamide, nonionic- polyacrylamide or inorganic salt since the waste water is generally provided with negative charge.

3)Paper making auxiliary: In the paper industry can be used as dry strength agents, retention agents, filter aids, can be greatly improved as paper quality, enhance the physical strength of paper and reduce the loss of fiber or filler to accelerate the treatment, since enhanced retention to help filter effect can also be used in the treatment of white water at the same time, in the drinking process can play a significant flocculation.

4) Fiber cement (asbestos - cement products) will enable the forming of asbestos - cement products improved drainage; insulation board in, and fiber additives can increase the binding capacity.

Packing:

Anionic polyacrylamide powder (25kg/bag, 500kg/bag, 1000kg/bag) is packed in two-layer bag with plastic bag for inner packaging, woven bag for external packaging or according to customers’ requires.

Each 20ft container can load 20tons, with pallet can load 18 tons; Each 40ft container can load 26 tons either with pallet or not.

Storage, Transportation &Cautions:
This product is non-toxic in normal use conditions, no stimulation of the skin, stored in the ventilation
and dry place, to prevent moisture. Avoid heat, humidity, Number of pile layer: less than 20, shelf life: 2 years

Notes and caution/attention:
1, the operator should wear protective equipment, skin contact, or water wash.
2, using the on-site, usually rinsed with water to prevent slipping injuries.
3, this series should seal kept in a cool dry place.

About us

Liaocheng City Yongxing Environmental Protection Science and Technology Co.,Ltd is a professional manufacturer of polyacrylamide. We have been in this field for more than 10 years. Polyacrylamide can be classified into four kinds: anionic, cationic, nonionic, zwitterionic. Polyacrylamide is mainly used in wastewater treatment, coal washing, mineral separation, papermaking, oil displacement and so on. Welcome you come to our factory and inspect our company. We are looking forward to cooperating with your esteemed company.

Product: