Show Case We are joined InterAuto and MIMS Expo in August 2013

Company Introduction

Our group is one of the biggest mechanical parking equipment manufacturer in China, the group established in year 2001 started as the production base of KAWASAKI parking company. By year 2012, our group generated annual sales of 868 million USD, that is more than 36,000 parking spaces manufactured and installed worldwide. We are holding more than 26 national patents and ISO9001/CE with 3 years no accident record.

Product Description

*TPP-2 series of products are valet parking equipment.*TPP-2 use hydraulic + double stages cylinders driven mode*All mainly structures and parts are processing by German laser cutting machinesand Panasonic robotic welding machines, more stronger and durable*After inspection, we will pre-assembly all mainly structures and wires, client only install simple work per our manual and video*TPP-2 operate by key switch, easy and convenient*The system has an advanced post sharing feature, by sharing the middle post to save money and space.*3 models of TPP-2 available to fit your different car size and weight*Single stage cylinder is available as an option to save cost.*The power pack is available from 110V-420V, single/3 phase.*The control power are 24V*Both dynamicand staticlock available.*Both outdoorand indoorversion available. Product Workmanship Product Feature1. By sharing column, the total width of the product have different figure.
2. If your ceiling height is more than 4.4meters, we could use single stage cylinder to cut cost for you.
3. The standard system is powder coated with zinc cover plate, and can be galvanized for outdoor use.
4. Mechanical lock on both sides for safety.
5. Photocell sensor available for electric lock release type to check under car and avoid trespass.
6 Sound & light alarm during lowering the system. (Optional)
7. Electric protection for power over load or under voltage.
8. Auto locking system for power cut as safety features.
9. Emergency stop button.
10. Explosion relief valve make sure hydraulic safety.
11. Balance chain for platform synchronization.
12. Cylinder direct drive.
13. Overhead beam for more stability (Optional, recommend to use when install independent unit)
14. Zinc cover plate used for water-proof

Product Specification

Product safety Project /Product Reference Container load

Models	TPP-2	TPP-2 Li	TPP-2 SLi
Unit A in 20ft	7 unit	7 unit	7 unit
Unit A in 40ft	18 unit	18 unit	18 unit
Unit B in 20ft	9unit	9unit	9unit
Unit B in 40ft	24 unit	24 unit	24 unit

Important notice

About the customized size:

If the size of the platform need to be customized based on customer require, difficulties might arise when entering or exiting the cars on the parking units. This depends on car type, the access and the individual driving behavior.

Operating device:

The position of the operating device depends on the project (switch post, house wall). From bottom of the shaft to the operating device an empty pipe DN40 with taut wire is necessary.

Temperature:

The installation is designed to operate between +5°and +40°C. Atmospheric Humidity: 50% at +40°C. If the lolcircumstances differ from the above please contactMuTrade.

Maintenance:

Regular maintenance by qualified personnel can be provided by means of an Annual Service Contract.

Protection against corrosion:

Independent of a maintenance workings has to be carried out acc. to MuTrade Cleaning and Maintenance Instruction regularly. Clean up galvanized parts and platforms of dirt and road salt as well as other pollution (corrosion danger)! Pit must be always ventilated well.

Should you have further requirements please contact me at your anytime!

We are available all the time to waiting for your comments.