1.E-glass emulsion chopped strand mat manufacturer

2.Fast wet-out

3.Even thickness

Introduction

Fiberglass chopped strand mat is a non-woven E fiber mat, product manufactured

Chopped strand mat Product Description:

Fiberglass chopped strand mat is a non-woven E-or C-fiberglass mat.

Product manufactured by spreading continuous filament roving of 50mm in length randomly and uniformly in combination with polyester binder in powder form (or other binder in emulsion form).

This product is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is suitable for the applications by hand lay-up FRP moldings

uniformly in combination with polyester binder in powder form (or other binder in emulsion from). This product is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is suitable for the applications of hand lay-up FRP moldings, such as various sheets and panels, boat hulls, bath tubs, cooling towers, corrosion resistant, vehicles etc.

Product Characteristics:

1. Good mat integrity,low fuzz

2. Easy to form

3. Very high tensile strength, suitable for filament winding

4. Even Thickness

5. Good resistance to watering and chemical agents in anti-corrosion applications.

6. Good mechanical physics and chemistry properties.

Special: products can be produced or packed according to customers' requirements

Function

Fiberglass chopped strand mat is chopped using the E chopped glass and emulsion adhesive bond. It is suitable for hand lay and can enhance the unsaturated polyester resins.

Storage Methods

Products should be stocked in a dry cool offices, if not needed, do not open the packaging or packaging truss mouth, so as not to damp.

Features

1.Fibers and binder distributed equally, non-hairiness, strains and other defects debris;

2.Products with higher mechanical strength, wet strength retention of the high rate of dry;

3.Laminates smooth surface, good light transmission;

4.Moderate hardness, easy to completely saturated, loss bubble products quickly saturated;

5.The mechanical properities with good filling and review mode, and applicable to the products of complex shape forming;

6.Resin saturated last, good review mode, easy to eliminate air bubbles;

7.High tensile strength, reducing the occurrence of tearing production;

8. Uniform thickness, no defects such as stains debris;

9.Speed, good technology and good erosion-resistant fiber;

10. Good mechanical capability.

product list:

fiberglass roving for spray-up

fiberglass rovings for SMC

fiberglass rovings for thermoplastics

fiberglass roving for filament winging

fiberglass Rovings for pultrusion

fiberglass for Continuous panel molding process

fiberglass roving for gypsum

fiberglass chopped strand mat

fiberglass for woven roving

fiberglass for sleeper train

fiberglass for hobas pipes

show box:

Please feel free to send your feedback for encouraging us to serve you.