Introduction

This product is a multipurpose charger stand with speaker. Have iPhone 30pin, Lightning to USB, Micro USB three charge-over plug, suitable for iPod touch 4, iPod touch 5,iPhone 4/4S, iPhone 5, iPad 2/iPad 3/iPad 4/iPad mini, Samsung and other devices.

Electronic parameter

Input voltage:DC 5V
Input current:2.5A
Output power:3W*2(RMS)
Max degree of distortion:1%
Min signal ratio:80dB

User Manual

1.Connect the product with iPad original power adapter via USB cable, then connect the iPad original power adapter into AC Power.
2.Option needed plug(Like iPhone plug 30pin) load into speaker's DOCK1/DOCK2 port. iPad or iPhone be insert to sunstrate, this are charge for iPad, iPhone.
3.When charging for iPad iPhone,Open the speaker power switch(power light is white), now could use speaker power amplifier.
4.iPad, iPhone using the audio amplifier, the inputting audio can be changed byt the audio switcht (with corresponding LED indicates the current input source, DOCK1 is blue light, DOCK2 is green light ), you can press Volume '+; -' control the volume in playing.
5.When enjoying iPad horizontal screen or insert othe audio equipment , connect the line-in cable to the line in port of the back speaker, turn on the power switch for playing the audio(It will automatically cut off DOCK 1 & DOCK 2 when using line in port to play the audio.)

Attention

1.Do not put the product place in hot and fire place.
2.Please do not squeeze or drop hard drop the product.
3.Please do not use chemical agents to clean this product! For cleaning wipe gently with a damp cloth!
4.Correct use this product and proper maintenance can prolong its service life.