Permanent Mineral Machine Metal Magnetic Separator

Application of Metal Magnetic Separator

♦ Magnetic separator is suitable for the wet magnetic separation of the materials whose granularity is below 3mm such asmagnetite, pyrrhotite, calcined ore and ilmenite and can also be used for removing iron from the materials such as coal, non-metal ore and building material.

♦ The magnetic system of magnetic separator is a compound of fine ferrite material and rare earth magnets and the average magnetic induction intensity of the surface of the cylinder is 100~600mT.

♦ According to specific need, customers can choose from many kinds of magnetic separators with different surface magnetic intensity such as downstream type, semi-reflux type and reflux-type.

Dry type magnetic separator

Wet type magnetic separator

Application Example of Metal Magnetic Separator

♦ Magnetic separator can be used in the closed circuit firing work for restoring the hematite, and it can separate the rawore that are not fully restored and return it for firing again.
♦ In the ceramic industry, magnetic separator can remove the iron mixed in the petuntse and improve the quality of the ceramic product.
♦ Magnetic separator can also be used in coal firing, sand making, refractory and other industries that need deironing.

Advantages of Metal Magnetic Separator

1) Short magnetic circuit.

2) Little magnetic flux leakage.

3) High magnetic intensity.

4) Low energy consumption.

5) Fine beneficiating results.

6) The magnetic system is always taking of high quality ferrite materials or composite with rare earth magnets, whose average magnetic induction of the previous drum table can be 800-4000mT.

7) The separator can be made of roll-shaped whose magnetic strength can also be improved to 8000mT, which has been the highest magnetic field strength all over the world.

Structure Characteristics of Metal Magnetic Separator

The permanent magnetic force tumbler is suitable for:
1. Fter medium and fine crushing, in order to improve the richness, the magnetic pulley is used for eliminating the wall rock in the iron ore.
2. To the un-deoxidized ore and send back for re-agglomeration.
3. To eliminate iron in the ceramic industry for improving the ceramic quality.
4. To eliminate iron in coal, foundry sand, refractory, and other industries.

Working Characteristics of Metal Magnetic Separator

♦ The pulp flows into cell body from the pulp box, and under the water flow of the feeding spray pipe, the mineral grain will go into the feeding area of the cell body in the loose condition.
♦ In the magnetic field, the magnetic ore particles will have magnetic gathering and form magnet group or magnet chain which is influenced by the magnetic force inside the pulp and moves to the magnetic pole and finally is absorbed onto the cylinder.

Parameter of Metal Magnetic Separator

We have developed long-term and excellent relationship with many ocean freight partners, such as APL, COSCO, OOCL, CSCL, MSC, etc. And train carrying is also available.The complete mode of shipping and best service with lowest price are always provided for customers.

What about the quality of your products?

Our products are manufactured strictly in accordance with the national and international standard, and we always test every equipment before the delivery.We guarantee if the quality of products is different with the description we described before your placing order, we promise 100% refund.

Is the price of products reliable?

Yes, we are manufacturer and we have the strength to give you the lowest price compared with other dealers. However, we have the policy that “According to the quantity order, we will offer the lowest price as possible with our utterly honest attitude towards business ”.

In order to help you get a suitable machine and provide you a preferential quotation,
Pls kindly provide the following information:
1. What’s the materials to process?
2. What’s the feature of the materials? Like density, moisture degree,input particle size and out put particle size.
3. What’s your capacity per hour?
4. What’s material for the machine?
5.What’s the machine you want to buy?A single machine or a production line.

Pre-service: Enthusiasm
Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments.
1.Select equipment model;
2.Design and manufacture products according to clients’ special requirement;
3.Train technical personnel for clients.

Services during the sales: Servant
1.Pre-check and accept products ahead of delivery;
2.Help clients to draft solving plans.

After-sale services: Faithfulness
Provide considerate services to minimize clients’ worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;
6.Provide technical exchanging.
7.Revisit regularly for establishing long-term and friendly relationship.

Service Commitment
Provide clients one-year warranty to make sure the machine work well.
Have spare parts of our very machine in stock all the time which means the replacements can bu sent to you timely.
Send every client a preferential quotation.