China new product! aeration tube for aquaculture

Location:
Jiangyin, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

Product Description

Fresh air through roots blower, airway pressure uniform expansion and achieve aerator, large fine bubbles in design value (diameter from 20 ~ 50UM), rise in the extremely slow, dissolved oxygen has obvious effect, thus greatly improve the oxygen in water, increases the breeding density.

Use of new technologies developed by micro-aeration devices for aquaculture aeven advantages.

1.high dissolved oxygen:advanced micro pore aeration bubbles in great contact surface of the water bodies and water flow rate is low,floating,long contact time,and thus high oxygen mass transfer effeciency.

2.activation of water:the microporous aeration devices,like the water body into a number of slowly flowing river,sufficient dissolved oxygen in the water body can establish a natural ecosystem,the water alive.

3.restore the water self-purification:microporous aeration is underwater oxygen and other oxygen is surface oxygen,qauaculture water bottom anoxia,the body of water underlying the deposition of fat mud,organic excrement,and the remaining metamorphic bait and other intractable organic matter,consume large amouts of oxygen,and sufficient microporous aeration ,and make it into microorganisms to dissolved organics,and water self-purification function to restore and strengthen.

4.ultra-low power:as a result of the microporous aeration device,the oxygen mass transfer efficiency is very high,so that the unit of dissolved oxygen in water to quickly reach more than 4.5mg/l,less water tankers or impeller oxygen quarter energy consumption can be significant savings in electricity costs of the farmers.

5.ecological farming and protection of breeding efficiency:continuous replenishment off the porous oxygen provide sufficient dissolved oxygen in the water,the water self-purrification ability to recover increased,microflora,algae natural balance,build up the naturak ecology of the water body,the viability of the breeding population is steadily improving,the full protection of the breeding efficiency.

6.security,environmental protection:microporous aeration device installed on the shore,good safety performance will not feed the body to bring any pollution,other oxygen water,easy to leakage on the human body and fish potential hazards.

7.easy maintenance:this product is lightweight,durable,easy to maintain.

The hoses can be wrapped in steel plate, and the corresponding plastic tube with a tee, suitable for all kinds of fish, to the layout of the real benefit farmers.

Rubber aeration tube Spec

Outer diameter(mm)

28

Inner diameter(mm)

18

Wall thickness(mm)

5.0

Metres heavy(g/m)

310

Packing quantity(meters/roll)

100

Cold resistance(-40°C,8h)

Tensile length ≥2.2 Mpa

Tensile elongation ≥130 percent

Hot empty aging (70°C 72h)

Tensile strength rate ≤20 percent

Break elongation rate ≤20 percent

Resist 5% NaOH (23°C 72h)

Tensile strength rate ≤20 percent

Break elongation rate ≤20 percent

Resist 5% HCl (23°C 72h)

Tensile strength rate ≤20 percent

Break elongation rate ≤20 percent

Pressure

s-1 200Kpa (water seepage amount) 600-800ml/h.m

s-2 200Kpa (water seepage amount) 10.8l/h.m

200Kpa (increase Oxygen amount) 420ml/h.m

Outer Diameter

10 to 28 mm

Wall thickness:

2 mm above

The bubble diameter

20-50 um

Dynamic power

02 / kw. Hr

The air flow

3-12 cubic meters/HRM

Applicable water depth

0-6 meters

Pictures:

Related product specifications:

Size

Type

Out diameter(mm)

Inner diameter(mm)

Wall thickness(mm)

Weight(g/m)

10

C/BC/B

10

7

1.5

45

14

C/BC/B

14

9

2.5

85

16

C/BC/B

16

10

3

115

18

C/BC/B

18

11

3.5

150

20

C/BC/B

20

13

3.5

160

21

C/BC/B

21

13

4

200

22

C/BC/B

22

14

4

205

25

C/BC/B

25

17

4

240

15

5

195

13

6

310

11

7

335

28

C/BC/B

28

20

4

290

Packaging & Shipping

Company Information

Jiangyin Jiangda Machinery And Equipment Co., Ltd. is a manufacturer of rubber products and plastic products, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in fishery and other industries.

Our Services

If you have any questions, please contact me.

Skype:aaron.kong5 tel:+86-510-86973828

fax:+86-0510-86971555 qq: 2642662810

mobile no:+86-15852603892

I am of your service at any time.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Jiangyin Jiangda Machinery And Equipment Co., Ltd.
Phone Number:
  86-0510-86973828
Fax Number:
 86-0510-86971555