1.Parameter Interpretation of glass vase

2.Product Show of glass vase

3.Product Cleaning Advice and Maintenance

Clean:Vase with a long time , there will be a lot of stains on the sides of the bottle , so that the dirt is not crystal

clear vase , seriously affecting the ornamental. Water alone is difficult to remove these stains .When cleaning a

vase , first wetted with water to the bottle wall , then take the amount of salt in your fingers , press the salt walls

clean vase . As the salt scrub gradually melt, rinsed with water and clean on it , and you will find the walls and

crystal vases as ever.Sometimes there will be a lot of dirt at the bottom of the vase,because the tiny bottles deep,

into his hand is difficult to clean , even with the tools , it is difficult to remove those stubborn stains , this time with

the"84 disinfectant."Adding a small amount of water in the bottle first,then add the right amount of"84 disinfectant",

the amount depending on how much you can stain the case may be . Place an hour later , the cloth wrapped

around the small wooden stick and put it into the bottle , gently wipe the bottom , you will find that the original is

very stubborn stains , it is easy to remove and clean the beginning .

Maintenance:

1 , regular cleaning , clean vase outer wall and the inner wall of water stains stains , sand. Avoid rubbing steel

and other hard objects to avoid scratching the surface of the vase .

2 , water regularly to preventthe long-term water immersion contaminated vase wall, and a vase of water

for too long can breed many tiny organisms, may corrode vase.

3, the vase is fragile, hard objects to avoid collisions, collapsed .

4 , away from heat, preventing overheating cracked vase .

4.More Products

5.Product Advantage

1)Efficient logistics makes the product for the first time for delivery to the customer.

2)Superior product quality, with advanced production equipment and production experience.

3)High quality and inexpensive, positioning similar products belong to “high grade, low consumption”.

4)Credit guarantee.

5)Continuous front-end design research and development of new products in this field.

6.Production Line

Glass production process mainly includes:

1)Pre processing of raw material. The massive raw material grinding, wet material for iron removal treatment, in

order to ensure the quality of glass.

2)The batch preparation. The melting. The glass batch is heated to a high temperature in the furnace or crucible

kiln, so that the formation of uniform, no bubbles, and in accordance with the requirements of forming liquid glass.

3)The molding. The liquid glass processing into products required shapes, such as flat, a variety of utensils. The

heat treatment.By annealing,quenching process,eliminate or produce glass internal stress,phase or crystallization,

and the change in the structure of the glass.

1)Packing Details

Packaging are plastic film topical, it can guarantee the product won’t be fragmented, and in the whole package

process we will try our best to protect products. Packing box are cartons, as requested by the customers and

brand can be printed.

2)Delivery Process

♦ All the libraries must be authorized by the company documents(authorized signature, seal) as the basis of delivery.

Received the company out of the notice, the warehouse for document examination (correct, check the documents

whether sufficient inventory), after the completion of the audit, notify the Department of transportation vehicle.

♦ Warehouse on the basis of strict invoice delivery, such as the number of invoice or the goods have any difference,

must inform the supervisor in time, and in the invoice situation clearly, so as to solve.

♦ We will by following the process to let you receive the goods, as follows:

1)The goods loaded vehicles, by the factory delivery to the nearest port of shipment.

2)Arrived at the port of loading container by the shipping service.

3)By the emergency goods and samples we sent by air to your hands.

1)7day*24hours Hot-line & Email Service

2)Your inquiry related to our products or prices will be replied in 24hours.

3)Well-trained and experienced staffs to answer all your questions in fluent English.

4)OEM&ODM is available.

1)About Us

♦ Beijing Shengjing International Trading Co. Ltd. (Art-Mall Trading Company Limited) is the leading supplier of

home furnishing chinese artwork and accessories trade. At present the company main glass handicraft

include the kitchen home furnishing utility plate,storage storage utility plate,art crafts such as plate.

♦ The company has first-class product design and development capability,according to the international market

demand and combined with the specialty,we can launch new products for more than 300 kinds of product every

year.

♦ We have a wide range of commodity information network, partners throughout the world, with Europe and the

United States many traders maintain close relations of cooperation. Through the unremitting efforts of all staff,

has made remarkable achievements. My company has a proficient business, the operation ability of the cadre.

To provide professional, personalized, all-weather, all-round service.

2)Our Markets

3)Contact Us