All

ZH-65 PE Plastic machinery factory

Location:
Zhangjiagang, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Industrial Supplies > Plastic Machinery

Product Description

ZH-65 PE Bottle Plastic blowing Machine max 5L

ZH-65 PE PP Plastic extrusion blow Machine for detergent bottle and sea balls

ZH Series Moving Mode PE Bottle Blow Molding Machine, A wide variety of materials can be used for the machine, which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan. The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.

ModelUnitZH65
Max.Product CapacityL5
Output(Cycle Time) Pc/Hr300/480
Extruding System
Screw Diameter mm65
Screw L/D Ratio 24
Extruding Power Kw18.5
No.of Heaters 3
Screw Heating Power Kw11.1
HDPE Plasticising Capapcity Kg/Hr56
Single Die Head
Max.Die-pin Diametermm135
No. of Heating Zone 2
Heating Power of Die Head Kw4.4
Double Die Head
Center Distance of Die Head mm160
Max.Die-pin Diameter mm70
Number of Heating Zone 3
Heating Power of Die Head Kw6.4
Tri-die Head
Center Distance of Die Head mm110
Max.Die-pin Diameter mm55
Number of Heating Zone 4
Heating Power of Die Head Kw6.5
Tetra-die Head
Center Distance of Die Head mm85
Max.Die-pin Diameter mm30
Number of Heating Zone 5
Heating Power of Die Head Kw6.5
Clamping System
Clamping Force KN57
Platen Size mm290*360
Platen Opening Stroke mm150-500
Max.Mould Size mm350*361
Mould Thickness mm155-300
Power
Total Power Kw42.5
Average Power Consumption Kw26
Air Pressure bar0.6
Air consumptionm 3 /min0.4/0.8
Cooling Water Consumption bar3
Cooling Water Consumption m 3 /Hr3/6
Machine dimension M3.4*2.2*2.5
Machine Weight T3.7



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Zhangjiagang Zplast Machinery Co., Ltd.
Phone Number:
  086-0512-4006288814
Fax Number:
 086-0512-4006288814
 
Zhangjiagang Zplast Machinery Co., Ltd.
 Jiangsu , China FREE
 

Resources