All

UL approved 60W , 12V LED Driver / waterproof LED POWER SUPPLY

Location:
guangzhouChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Electronics & Electrical > Power Supplies

Product Description

UL approved 60W , 12V 24V LED Driver / waterproof LED POWER SUPPLY

UL number:E333976

Features :

l Constant voltage design

l Universal AC input / Full range

l Epoxy encapsulated with IP67 level

l Withstand 300VAC surge input for 5 seconds

l Protections: Short circuit / Overload / Over voltage

l Fully isolated plastic case

l Cooling by free air convection

l UL879, lass 2 power unit, pass LPS

l 100% full load burn-in test

l Low cost, high reliability

l Suitable for LED lighting and moving sign applications

l 2 years warranty

UL approved 60W , 12V LED Driver / waterproof LED POWER SUPPLY

SPECIFICATION LPS IP67

MODEL HMA-60-12 HMA-60-24
OUTPUTDC VOLTAGE 12V 24V
RATED CURRENT 5A 2.5A
CURRENT RANGE 0 ~ 5A 0 ~ 2..5A
RATED POWER 60W 60W
RIPPLE&NOISE(max.) note. 2 120mVp-p 150mVp-p
VOLTAGE TOLERANCE±8.0%±5.0%
LINE REGULATION±1.0%
LOAD REGULATION±6..0%±2.0%
SETUP,, RISE TIME note.6500ms 20ms/230VAC 500ms20ms/115VAC at full load(for 5~36V);500ms 20ms/230VAC 500ms20ms/115VAC at full load(for 5~36V);
HOLD UP TIME(Typ.)50ms/230VAC 16ms/115VAC at full load
INPUTVOLTAGE RANGE120VAC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.) 83% 86%
AC CURRENT1.2A/115VAC 1A/230VAC
INRUSH CURRENT(max.)COLD STAR 30A/115VAC 60A/230VAC
LEAKAGE CURRENT0.25mA /240VAC
PROTEC-OVER CURRENT110 ~ 150% rated output power
TION Note.4Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 13.8~16.2V 27.6~32.4V
Protection type: Shut down o/p voltage, re-power on to recover.
ENVIRON-MENTWORKING TEMP.-30~+70%(Refer to output load derating curve)
WORKING HUMIDITY20~90% RH-nondensing
SHORAGETEMP,HUMIDITY-40~+80°C, 10~95% RH
TEMP.CONEFFICIENT±0.03%/°C(0~50°C)
VIBRATION10~500Hz, 2G 10min./1 cycle, period for 60min. each long X, Y, Z axes.
SAFETY & EMCSAFETY STANDARDSUL879 Class 2, CAN/CSA C22.2 No.222-M91, IP67 approved, Design refer to TUV EN61347-2-13
WITHSTAND VOLTAGEI/P-O/P:3KVAC
ISOLATION RESISTANCEI/P-O/P:>100M Ohms / 500VDC / 25°C / 70% RH
EMI CONDITION &Compliance to EN55022(CISPR22)Class B
RADIATION
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
OTHERSMTBF732Khrs min. MIL-HDBK-217F (25°C)
DIMENSION226*60*46mm (L*W*H)
PACKING1.3 Kg; 10pcs/ 14Kg
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.


This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Guangzhou Fangcun Hongmei Neon Equipment Factory
Phone Number:
  86-020-81608506
Fax Number:
 86-020-81609523
 
Guangzhou Fangcun Hongmei Neon Equipment Factory
 Guangdong , China FREE
 

Resources