3.5" wireless video door phone intercom system

Model SMT-V35K

Thank you for purchasing our product

Please carefully read this user manual before using the product and follow the manual to install and operate.

1. Introduction

The product is applicable in office, house, apartment, hotel, building and so on.

The outdoor camera is easy to install. Indoor monitor is portable. It can be hung on the wall, or be placed on the desk.

2. Features

(1) 2.4GHz digital frequency hopping and encryption technology, transmission distance up to 200 meters in free field, robust anti-interference

(2) Clear night vision can capture image in low-illumination environment

(3) Rain shield for the outdoor camera is available

(4) 3.5 inch TFT color panel for indoor monitor

(5) Surveillance, unlock, hands-free call and talk

(6) 16 chord melodies and melody volume is adjustable

(7) Brightness and talk volume are adjustable

(8) Date (only one camera with one indoor monitor system supports) and time shown on the screen

(9) Indoor monitor could take pictures automatically or by instruction. It could store up to 100 pictures with date and time

(10) BL-5J battery of camera and monitor is replaceable and rechargeable

(11) Outdoor camera with battery works about 30 days if with battery, the outdoor camera with power adaptor works all the while.

(12) Wireless unlock control supports power on and power off unlock

(13) One outdoor camera supports up to 4 indoor monitors and vice versa

3.Specifications

Camera		Indoor monitor
Light Source	6 LED lights	USB Power	Input:AC 100-240V 50/60Hz Output:DC 5V/1A
Camera	CMOS 300K pixels	Screen	3.5inch TFT 800x480
Battery	BL-5J 1250mAh	Battery	BL-5J 1250mAh
Frequency	2.4GHz	Frequency	2.4GHz
Size	126x93x42 mm	Size	236x130x18 mm
Installation	Double-sided tape or screw fix	Installation	Place on the desk etc. Or Wall mounting type
Charge time	3hours	Charge time	3hours
Standby	35 days	Standby	4 days

4. Outdoor camera

(1) Microphone (2) Camera lens (3) Rain shield (4) Infrared light

(5) Indicating light, show green if press pair or call" button, show red if low voltage

(6) Indicating light for recharge (7) Call"button (8) Speaker

(9) Adaptor interface (+5V, GND) (10) ir" button

(11) Battery lid (12) Obligate area welding antenna

5.Indoor monitor

1) Speaker (2) TFT screen (3) Antenna (4) Microphone

(5) Monitor" button (6) Unlock button (7) Talk button

(8) Left (9) Down (10) Right (11) charging light

(12) Working light (13) Take picture button (14) Up (15) USB interface (16) Power switch (17) Fixed slot (18) Battery lid (19) Bracket

6. Installation instructions

The outdoor camera should be installed at the shielded position to be free from direct shinning of strong light and raining. The height for installation is recommended to be 1.5m~1.7m for outdoor camera to focus on the best monitoring range. Wireless signal will be weakened if there are obstacles between the outdoor camera and the indoor monitor. Please check the best sign of monitor when install the outdoor camera to get the best position.

If wiring needs to go through wall, the plug should be firstly wrapped with tape so as to avoid the sand or dirt going into the plug thus resulting in malfunction.Use double-sided tape fix outdoor camera on the wall or door as the following diagram.

Or take off the screw on the bottom, remove the back box fit to the wall, embed the outdoor camera to the back box and use the screw to fix it as the following diagram.

7. E-lock installation

E-lock and power of e-lock are not included in this product. Wireless unlock control connects the e-lock, shares 12V power adaptor with e-lock when it works.

Notes: The distance between wireless unlock control and outdoor camera should be within 10 meters so that the wireless unlock control is able to receive unlock command. The remote control uses 27A/12V battery. User presses of remote control to unlock. The work distance between remote control and unlock control should be within 15 meters.

Schematic diagram

The system can work together with intelligent lock, Intelligent lock uses 4pcs AA batteries.

8. Accessories( solar panel, remote, camera battery are optional)

9.Packing list in the box

Outdoor camera parts

(1) Outdoor camera

(2) Power adaptor Input: 100-240V 50/60Hz Output: 5V/1A

(3) DC cable

(4) BL-5J battery (optional)

(5) Wireless unlock control

(6)remote controller (optional)

(7) Screws and stoppers

(8) double-sided tape

Indoor monitor part

(9) indoor monitor

(10) USB power adaptor; Input: 100-240V 50/60Hz Output: 5V/1A

11) BL-5J battery

(12) Fixed iron for indoor monitor

(13) User manual

color box size: 27*28*5.5cm