Machine Recycled Tire, Waste Tire Recycling

Product Description

Processing Flow:

Waste tire -- Ring cutting --Strips cutting -- Rim cutting --Steel separation -- Crushing with magnetic separation -- Fiber separation -- Final product

Structures:

Ring Cutter: Cut the sidewall and the top of tire's connection

Structural Principle:

1. The device consists of frame, motor, reducer, transmission, supporting frames, knife, tools and other components.

2. Knife is made of alloy and hard wear-resisting.

3. Motor and reducer connected by coupling, compact structure, simple operation, easy maintenance.

Strips Cutter: Cut sidewall into wide of strips is 3-5cm, and tire circle reserved

Structural Principle:

1. This equipment mainly consists of two blades, motor and reducer, frame and transmission mechanism etc.

2. Knife with special materials, hard wear-resisting, can be used after repeatedly grinding .

3. This equipment is low energy consumption, use a low speed, easy operation and safety.

Rim Cutter: Cut strips into tire block

Structural Principle:

1. The device consists of frame, motor, transmission mechanism, balance equipment, two move knife and a fixed knife, and the compression gear etc.

2. Knife is made from alloy, hard wear-resistant, can be used after repeatedly grinding.

3. Uniform speed of device, low energy consumption, easy operation and safety.

Steel Separator: Separate the steel from ring circle.

Structural Principle:

1. The device consists of frame, motor, reducer, transmission mechanism and regulating device of roller etc.

2. Ditch is made of alloy, hard wear-resistant, roller can be used repeatedly after surfacing repair.

3. This equipment has simple structure, high efficiency, low energy consumption, strong practical, easy operation and safety.

Linear Vibrating Screen: It will classify the rubber powder for first time

Conveyor Machine: Use to transport not up required size re-back to tire shredder machine

Magnetic System: It can classify thin steel from rubber powder

Powder Screen: Second time to classify rubber powder

Tire Crusher: Crush tire block into fine powder

Structural principle:

1. The equipment consists of one base, frame, front and rear roller, transmission gear, reducer, motor, adjusting devices, safety switches and electrical control components.

2. The rollers adopt alloy cold hard cast iron (rollers implement national standard by HG/T 3108-1998) surface hardness wear and long life, can be repeatedly repair.

3. The device has low noise, high efficiency, low energy consumption, simple operation, without any environmental pollution

Model	XKP-400	XKP-450	XKP-560
Feeding size	3.5 block	3.5 block	3.5 block
Output size	10-30 mesh size	10-30 mesh size	10-30 mesh size
Productivity	150 kg/h	300 kg/h	500 kg/h
Power	45Kw	60Kw	90Kw
Dimensions	4210*1850*1925 (mm)	4550*1970*1860 (mm)	5620*2260*1900 (mm)

Fiber Separator: Separate the fiber in powder

Structural principle:

1. The equipment consists of frame, control motor, blower, transmission mechanism, electric and popeline.

Model XKP400/450/560:

XKP400 150kg per hour

XKP450 300kg per hour

XKP560 500kg per hour

Blades amd Roller:

Packaging & Shipping

1. Wooden Case

2. Foam Packaging

3. Main Crusher Nude Packaging

Rubber Powder Application:

Sports venuesRubber runway / Recreation ground /Bowling alleySchool stadium /Tennis and basketball courts / Sidewalks ……TrafficModifying asphalt /Tire / Speed-down zone / Raft ……Daily life thingElastic / Rubber shoes / Raincoat……Stationery and sporting goodsEraser / Ping-Pong / Basketball football……Construction,building materialsRubber tiles /Carpet pad / Floor / Roof liner and coverWaterproof materials / Roof and wall waterproofing membrane……Industrial productsReclaimed rubber / Triangular belt / Gasket ringHose / Conveyor belt… Company Information

1.We are the leading manufacturer specialized in designing and manufacturing waste tire rubber powder equipment in China with the experience of more than 20 years.

2.Manufacturing according to the ISO9001:2008 quality control system guidelines.

3.Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs.

FAQ

1. Iron/steel removing ratio>99.5%, fiber removing ratio>98%

2. Adopt semi-automatic control system for whole line, reduce labor cost
3. No sewage and waste gas discharge, environment protection

4. Dealing with 0.65-1.2m tires

5. 3-4 workers for operation

6. The space requirement is at least 15m length *8m width *4m height

7. The machine can make the powder into 10 -30 mesh

8. Equipment warranty is 1 year

9. 40 open top container for transportation

10. Installation: 7days

11. Delivery time:25-30 days