With Recycled using ship launching air bag:

Applications

Marine platform launching,ship upgrading or docking(up to land), jack-up heavy, ship segments combination, salvage, sunken vessel raising and other engineering works.

Merits of Marine airbag:

A.Saving the investment of shipyard construction

The construction of launching facilities, like traditional slideway and its underwater engineering, are very

expensive.If using airbag launch, only a simple launching slip way shall be built without complex underwater

engineering.

B.Simple operation,saving labor and work hours

Airbag launch avoids lots of trouble, such as the complex process of cleaning away the mucky soil on the

surface of the slideway, covering or smearing with lubricating grease, setting slide plates and fixing the hull.Usually the preparation for airbag launch maybe finished

within one or two days and the operation is simple.

C.Environmental friendly

In traditional slideway launch, some distance slideway extends into underwater, which affects the flood

embankment and navigation environment. Furthermore, lubricating grease mass causes water contamination.

Airbag launch shortens the length of ramp way length under water. There is no emission into water.

Featrues:

High quality rubber and high tensile synthetic fiber are used

No-mould vulcanization and surround pasting formation process

Through the experimental verification according with standards of ISO17682:2013

Ordering Information

Air bags' three main characteristics are needed for ordering ship launching air bags.

1. Air bag diameter, D

Air bag diameter, D, is the air bag cylinder body's outside diameter, when the air bag is air-charged and free of compression.

Our company supplies five diameters for customer's selection: 1.0m, 1.2m, 1.5m, 1.8m, 2.0m.

We would like to offer special size air bags as request.

2. Available length, L

Available length is a air bag cylinder length when the air bag is charged. The available length

is directly relevant to the operation requirements, so L is a main order data. The maximum

available length of our air bag is 24m. The minimum available length should be three times of

the air bag diameter. The maximum length between the air bag two ends, Loa, is a reference data.

3. Rated working pressure, P

The required maximum working pressure should be provided by customer.The rated working pressure, P,

specified in our specification, is the air bag's largest safe working pressure. The maximum pneumatic

pressure should not exceed no matter the air bag is compressed or in free condition.

Packing mode:

1. Nude packing

2. Packed in weaving bags

3. Packed in wooden cases

4. Packed in 20GP 40 GP 40 HQ or open top containers

5. As clients requirement

Technical Supports and Services

Our company would like to provide technical supports for clients, which order and use the airbags produced by us,

including turnkey contract for project of ship launching and upgrading, to provide package solving plans as well as

design of dedicated shipbuilding berth and ramp for ship launching with airbags.

For a large ship launching,because the launch environment is different for different shipyard. so the perfect and

safety launch solution is only to be drawn from concrete local shipyard conditions,for which the technical research

team with rich previous experience of success is the most important foundation.Our company posseses such

technical research team and would like to offer technical supports to the customers at home and abroad in ship

launching or upgrading with airbags,up to now the most large launch ship reached DWT 10,000ton.

Factory view:

Changlin gate

Workshop

Hall

Meeting room