Flexible Prismatic Conspicuity Marking Series

YS Flexible Prismatic Conspicuity Markings Series are highly retroreflective flexible microprismatic markings designed for rugged outdoor use on the sides and rear of trucks, trailers, and automobiles. Series 963 provides the visibility needed to oncoming motorists which results in improved safety.

Product Description

YS Diamond Grade Conspicuity Markings Series and YS Flexible Prismatic Conspicuity Markings Series are highly reflective and are pre-coated with an aggressive pressure sensitive adhesive for application to most clean, dry, wax-free, non-corroded, weather resistant surfaces. The adhesive is protected by an easy-release liner. YS conspicuity markings are intended to be applied to the side and rear perimeter of vehicles in a continuous stripe to enhance visibility and recognition by motorists. Markings can be applied to flat surfaces (with and without rivets) and non-compound curved surfaces with a radius greater than 5 inches. For application to corrugated vehicles, apply the marking to the bottom and top rails or between corrugations if adequate flat surface is available. Application is not recommended to rusted or corroded metal, loose or chalking paint, irregular shaped framework, bolts, rivets larger than 1/2 inch high, support plates, corrugations, within 1/8 inch of door hinges, exterior posts, weld joints, the end of the vehicle surface, or within 3 inches of mandated lights, reflectors, or turn signals.

Additional Product Information

Case Quantity 1 roll per case
Case Inner Pack 1 roll
Size: 2 inches x 50 yards (in 12 inch cuts) or custom
Tape Color : Silver, yellow, orange, red, green, blue, and golden.

Wide-angle pattern is available for option.

Flexible Prismatic Conspicuity Marking Series

Flexible Prismatic Conspicuity Marking Series,alternating six-inch red and white bands

Diamond Grade Prismatic Conspicuity Marking Series