360 Ton No Pallet New Automatic Block Press Machine Clay Brick

Location:
zhengzhouChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

360 Ton No Pallet New Automatic Block Press Machine Clay Brick

Product Description

Brief Introduction of MZJ360-3

1.MZJ360-3 is a new type high pressure unfired brick machine with latest technology.It can produce various bricks, such as solid bricks,blind hole bricks, etc . changing different moulds,make different bricks.

2.Widespread waste stuffs as raw materials, such as soil, sand, clay, stonepowder, flyash,slag, coal gangue, building rubbish,cement etc. turn waste into wealth.It has won the national patent of “Yuhu” brand and authentication of ISO 9001 Quality System Certification.

3.With superior technology and 38 years experience, the bricks produced by MZJ series brick machine are of “three” high property:high quality, high strength and high density. ——the best choice of customers!!

Superiority of MZJ360-3 Brick Making Machine:

1.Baking-free/unfired bricks:no need of firing bricks,no kiln,no steam cure; new trend and benificial investment in construction field;

2.High pressure/strength: mechanical vibration and double-sided pressure,the maximum forming pressure can reach 360ton, enhance high strength of bricks,each brick stress of more than10MPA, can be used in bearing walls;

3.Environmental friendly:a wide range of wastes as material, such as sand, fly ash,slag, construction waste, industrial tailings, stone dust, coal gangue, etc,turn waste as “wealth”,protect environment;

4.Special electric heating system:make bricks be angular with best appearance good quality and uniform density,avoiding raw materials stick together, low defect rate;

5.Small power with high moulding pression,energy saving equipment;

6.Compulsory blanking equipment: has the function of arch-destroying to wet feeds, so it results in sufficient feeds in the molding box and improves the rate of finished products;

7.Timing vibration device: accelerate feeding suffice and balance blanking, ensure the uniform density and strength of bricks;

8.No pallet need, stack bricks directly;

9.Excellent property:sufficient feeds, vibration while pressing bricks to exhaust air fully, uniform density of bricks, no gas entrapment;

10.Long service life:superior durability,good resistance to wether condition, better heat and frost resistance;

11.Low noise;

12.Full automatic, PLC control, save labor cost.

Technical Specifications of MZJ360-3 brick machine:

Technical Parameters

productivity

standard brick(240*115*53mm):3600ps/hour

cycle time

3-4S

host machine power

18.5kw

host machine weight

7.5ton

dimension(L*W*H)

1950*2060*2750 mm

quantity/mould

3 ps/mould

moulding pressure

360ton

bricks specifications

240*115*53,240*115*90,240*190*90,240*240*90etc

Technological Process of the whole automatic brick making line:

Natural Curing Period:
Firstly,after the bricks be shaped , brick can be stacked for 10-14 layers directly. be cured with water 24 hours later.
Secondly, in the later days, curing bricks with water twice a day in spring and autumn, 3 times a day in summer.
Lastly, after curing with water in such way within 20 days, the bricks have reached the high strength and can be applied. bricks can be sold after 15 days.as time goes on ,the brick strength is becoming higher and higher,more and more durable.
Packaging & Shipping

Our Services

Pre-sale:

(1) Professional suggestions (raw material matching, machine selection, plan the condition of

build factory, feasibility analysis for brick machine production line etc)

(2) Device model choice (recommend the best machine according to the raw material, capacity

and the size of brick)

(3) 24 hours service

(4) Welcome to visit our factory and production line anytime

(5) Introduce the company file, product categories and production process

(6) OEM design

Sale:

(1) Update the production scheduling in time

(2) Quality supervision

(3) Product acceptance

(4) Shipping on time

After-sale:

(1)Engineer availabe to guide to plant establishment at clients site.

(2) Set up, fix,and operate

(3) Will not train the operator until they are satisfied at clients side.

(4) Skill support for the whole using life.

(5) Recall clients regularly ,get feedback in time,keep well communication with each other.

Company Information

Henan Sanxiong Heavy Industry Co., Ltd was built in 1984. Having been specialized in the development, research and production of new building materials equipment for almost 38 years.We have successfully installed and debugged whole brick press machine production lines, automatic hydraulic block making machine production lines and clay brick making machine production lines for customers at home and abroad. Our products have achieved ISO9001:2000 certificate, National patent products, also won a series of national and local technical award certificates. Our products have been sold to Middle East, Russia, Australia, South Asia, South Africa, West Africa and other Areas. More information, please click here

http://www.zzsxzg.en.alibaba.com/company_profile.html

FAQ

1. Q: What is no burning brick making machine ?

A : No burning brick making machine is a term for brick machinery.It is different from the traditional kiln brick processing .It make bricks by pressure, no need fire.

2. Q:What is MZJ360-3 and MZJ600-3 ?

A: MZJ360-3 and MZJ600-3 are two models of un burnt brick making machine ,360 and 600 mean the mechanical pressure for 360ton and 600 ton.and 3 means:3 piece of bricks per mold. combined with the current domestic and foreign similar characteristics and marketing needs,is a new design of brick making equipment, has compact structure, high pressure, strong rigidity,easy operation, high output, durable characteristics.

3.Q: What is the quality and strength of the brick?

A: First,we have developed a new type of mixer for the brick making machine,it will grind the material when it is mixing the material.and in this way,we make the material mixed uniformly ,improved the density of the brick,and for no gas barrier and the pressure of the brick making machine is 360t and 600t ,so we make the brick more strength,and the pressure of every brick can bear is more than 10MPa for every square centimeter. a man can stand on the brick which was made just now, the brick can be can be also directly stacked 10-12 layer.

more questions, please view http://zzsxzg.en.alibaba.com/custom_page_1/FAQ.html

Leave an inquiry here to know more product information,latest price,shipping,package,etc!



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Henan Sanxiong Heavy Industry Co., Ltd.
Phone Number:
  86-0371-18937118667
Fax Number:
 86-0371-67810669