Two component steel structure fireproof coating building construction material

KMT SERIES

Introduction

KMT series is derivative product of GGK-113 which can be painted rusty iron sheet, iron and other alloy products. Usually iron products should get the rust removal by sand blast first when they get rusty. Then, they paint the anti-rust coating and fireproof paint. If it does not get the rust removal first and directly paint, the rust will spit out. But, the same situation will not happen if using KMT series .

Characteristic

Quick and Easy use Hydrophilic, non-toxic, smokeless Well apply on Steel construction body, steel bar and steel sheetIt is water-based, high environmental protection, it will not be blistering and damage while burning.Rust removal is unnecessary unless the thick rust ApplicationIt can be used in rocket missile and various high fever productsHeating pipeIron plate or sheet and other related productIndoor, outdoor fireproof paintMultiplex iron materials fireproof paintPlywood, veneer board surfaceWooden partition fire Firebreak alleyFire door surface treatment etc.

Construction indication

The weight ratio for main and curing agent of KMT series is 1: 0.3Clean away water, oil, dirt, corrosive saline from the surface completelySpread KMT series on the surface by brushing, rolling or sprayingClean the mixing container and tool immediately after finish Avoid to working on humid environment and rainy day

Samples

Specification may vary from above, due to the reasons that GYC Technical Service Team develops in customizing specifications and grades depending on the marketing requirements. GYC Group Technical Service Team is your strong backup whenever you require special handling, process consulting and the production cooperation of R&D. Please do not hesitate to contact our Overseas Department. Thank you! And here is the related product you might be interested in, too.